Securing Your Child - Britax ROUNDABOUT 50 CLASSIC User Manual

Securing Your Child

Once the child seat has been installed in the vehicle
and adjustments have been made, follow these
instructions to secure the child.
1 Loosen the harness by lifting the harness
adjuster lever while pulling both shoulder straps
forward (Fig. A).
2 Release the chest clip by squeezing the tabs
and sliding pieces apart (Fig. B).
3 Unfasten the harness buckle by pressing the
release button and sliding the tongues out.
4 Move the harness straps to the side of the child
seat. Use the harness holder located on the
straps and side of the cover to aid in holding
the straps.
5 Place child in the child seat.
6 Position the harness straps around the child
and fasten the harness buckle (Fig. C) and
chest clip (Fig. D).
• Proper connection of the harness buckle is
confirmed with an audible click after inserting each
buckle tongue (see diagram below).
CLICK
x 2
Securing Your Child
A
b
C
D
39