Installing The Child Seat: Harness Mode - Britax FRONTIER 85 User Manual

Installing the Child Seat: Harness Mode

LATCH – Short Path
Before you begin:
Check that your vehicle has LATCH anchors.
9
* Check your vehicle owner's manual for the vehicle's LATCH
anchor limits.
Check that your vehicle has a top tether anchor.
9
* You MUST always use the Versa-Tether for children weighing
65 – 85 lbs (29.5 – 38.6 kg).
* Britax recommends that the Versa-Tether is used at all times.
Using the tether will improve the stability of the child seat and
reduce the risk of injury. Check your vehicle owner's manual for
tether anchor locations.
Remove the Versa-Tether
9
place it over the child seat back to keep it from becoming
pinned between the child seat and vehicle seat during
installation.
28
hook from the storage clip and
®
Installing the Child Seat: Harness Mode
Versa-Tether
(Top Tether)
Install with LATCH using only the short belt path as shown
above.
29