Booster To Harness Mode - Britax FRONTIER 85 User Manual

Switching Between Modes

Booster to Harness Mode

To replace the harness and
buckle:
Move the harness adjuster to
1
the highest position (a), then
move the head restraint to the
lowest position (b).
* Ensure that harness slots in
the cover, head restraint and
harness adjuster are aligned.
Replace the locking screw
2
to lock the head restraint
adjuster.
Turn and slide the retainer of
3
the buckle strap through the
buckle slot.
* Choose the slot that is closest
to, but not under your child.
Slide the retainer back into
4
place to hold it against the
child seat shell. Verify that the
strap is not twisted, and that
the button faces out.
48
Locking
Screw storage
Turn and slide the retainer of
5
each harness strap through
the harness slot.
* Ensure that the icon on the
chest clip faces out.
Slide each retainer back into
6
place on the child seat shell.
Insert the harness straps
7
through the slots in the cover,
shell, and harness adjuster to
the back of the child seat.
Remove the harness yoke
8
from storage on the belt shield
(a), then remove the belt
shield (b).
Nest the harness straps by
9
inserting the right strap loop
into the left strap loop.
Switching Between Modes
49