Table of Contents
Advertisement
Care and Maintenance
Ensure that the adjuster strap
9
attached to the yoke is not
twisted, then slide nested
harness straps completely
onto the harness yoke. See
pages 49 and 50.
Replace the belt shield over
10
the harness straps and yoke.
Push the buckle retainer
11
through the slots in the child
seat shell and cover to the
bottom of the child seat.
*
Ensure the harness straps are
not twisted and that the buckle
faces out.
Reattach the clips behind the
12
arm rests and slide the fabric
under the lower belt guides.
66
Cleaning the Buckle
If your child eats and drinks while in the child seat, you may need
to check the buckle periodically and rinse out any accumulated
debris or dried liquids.
Remove the Buckle
Locate the metal retainer on the
1
bottom of the child seat, and
slide the retainer up to release it
from the child seat shell.
Turn and push the buckle
2
retainer through the shell and
cover to the top of the seat.
*
Pull the belly pad over the
buckle retainer to remove.
To Clean:
•
THOROUGHLY RINSE the
buckle using warm water.
•
TEST THE BUCKLE by fastening
and unfastening until a positive click is heard after inserting
each buckle tongue. If clicks are not heard, repeat the cleaning
procedure.
•
TOWEL DRY
•
DO NOT:
*
Soak
*
Lubricate
*
Use solvents
*
Use soap or household detergents
Care and Maintenance
67
Hide quick links:
Advertisement
Table of Contents
