Britax COMPAQ Instructions For Installation & Use page 23

Safe-n-sound convertible child restraint for vehicle use
Table of Contents

Advertisement

CARE & MAINTENANCE
REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A.
Check the webbing for fraying.
B.
Check that the buckle clicks and is not sluggish or sticky in operation.
C.
Ensure there are no cracks in moulding or the plastic moulding.
D.
Check the Harness Adjuster is operating and is clamping the webbing.
E.
If any part of the restraint is cracked or broken, seek repair immediately or
replace the child restraint.
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your Harness Buckle, it may
become sluggish. An indication of a sluggish Harness Buckle is that you cannot hear a click
when engaging the Harness Tongues. To restore the Harness Buckle to good working order
it needs to be cleaned as follows:
A.
From the underside of the restraint
pull each crotch 3-bar slide then
turn 3-bar slide and push through
each slot to remove the Harness
Buckle from the restraint.
B
Place the Harness Buckle under warm
(approx. 40 degrees Celsius) running water as
shown below. Let the water run through the
mouth of the buckle for five minutes.
D.
If you still cannot hear a strong audible click after engaging the Harness Tongues &
Buckle, then repeat cleaning several times. If the Harness Buckle cannot be returned to
its original working condition then contact Hipod Nursery Products.
E.
Refit the Harness Buckle to the restraint with the red button facing out & feeding each 3-
bar slide through appropriate slot.
C
Click
Engage and disengage the Harness
Tongues and Buckles several times until a
strong audible click is heard.
Forward & Rearward Facing
Cover
Body
3-bar
slide
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq deluxe25/c/2004 series25/d/2004 series

Table of Contents