Britax COMPAQ Instructions For Installation & Use page 22

The restraint has a flame retardant cover which is removable for cleaning. Cleaning
instructions are on the care label attached to the cover. If fluffy cover is fitted then washing
cover prior to use will remove excess fluff. Ensure that the inside of the buckle is free of
foreign matter. Cleaning instructions are on page 23. Use only mild soap and water to clean
all metal and plastic parts of the restraint.
TO REMOVE COVER:
A. Remove the restraint from vehicle as instructed on page 6.
B. Disengage harness tongues from harness buckle.
C. Remove any accessories, if fitted as instructed on page 24.
D. Disengage harness straps from harness Strap Connector as instructed on page
17, item B.
E. Unhook the cover at the top and bottom of the restraint. Peel cover from outer rim of
the body starting from
F. Remove the cover while feeding the Harness Tongues & Crotch Buckle through the
lap and crotch strap slots in the cover.
Do not remove Harness Adjustment Strap from Harness Adjustment Strap Lock.
TO REPLACE COVER:
A . Feed the Harness straps and
Harness Tongues through Lap
Strap Slots and through matching
shoulder strap slots in the cover
and seat.
B. Stretch cover over the top of the
restraint first at
as instructed above and then stretch the
cover around the rim of the restraint.
C. Re-fit the Seat Cover attachments.
D. Re-engage harness straps to Harness
Strap Connector as instructed on page
17, item D to F.
E. Feed Crotch Buckle through slots in cover.
COVER
(STYLE MAY VARY)
The cover has been designed to protect your child
when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as
some food or drink products may cause damage or
marking to the cover.
IMPORTANT: Do not pull sticky items from covers as the cover may be damaged - soak in
water and gently remove.
22
Forward & Rearward Facing
on both sides and then at
then the sides at,
HOW TO CLEAN
, at the top.
Shoulder
Strap Slots
Adjustment
Harness
Strap.