SPECIFICATIONS / SPECIFICHE TECNICHE
Input Voltage / Alimentazione
Current Drain / Consumo (Alarm/Stand-By)
Tipical voltage / Tensione nominale
Coverage / Portata in lunghezza PIR / MIC
Angle / Portata in larghezza
PIR / Piroelettrico
Lens / Lente (patterns and levels / fasci e livelli)
Alarm period / Durata allarme
Anti-opening / Antiapertura
Creep zone / Antistrisciamento
Alarm Contact / Contatto di allarme
Tamper switch / Contatto di tamper
Operating Temperature / Temperatura di esercizio
Storage Temperature / Temperatura di stoccaggio
RFI Protection / Protezione RFI
Led walk test (MIC and PIR)
Housing / Cover
Accessories / Accessori
Dimensions / Dimensioni
EN 50131-2-2 GRADE 2 CLASS II
Our products/systems comply with the essential requirements of EEC directives.
Installation must be carried out following the local installation norms by qualified personnel.
The manufacturer refuses any responsibility when changes or unauthorized repairs are made to the
product/system.
It is recommended to test the operation of the alarm product/system at least once a month. Despite
frequent testing and due to, but not limited to, any or all of the following: tampering, electrical or
communication disruption or improper use, it is possible for the product/system to fail to prevent
burglary, rubbery, fire or otherwise. A properly installed and maintained alarm system can only reduce
the risk that this happens.
Tutti i nostri prodotti sono conformi ai requisiti richiesti dalla norma CEI 79-2 2°ed. 1998 + Ab 2000.
L'installazione deve essere eseguita a regola d'arte da personale specializzato.
Il produttore declina ogni responsabilità nel caso in cui il prodotto venga manomesso da persone non
autorizzate.
Si raccomanda di verificare il corretto funzionamento del sistema d'allarme almeno una volta al mese,
tuttavia un sistema di allarme elettronico affidabile non evita intrusioni, rapine, incendi o altro, ma si
limita a diminuire il rischio che tali situazioni si verifichino.
www.amcelettronica.com
9 to 15 Vdc
(23 mA / 19mA) @ 13.8Vdc
13.8 Vdc
12 mt / 7 mt
100°
2 elements / 2 elementi
18 patterns on 3 levels / 18 fasci su 3 livelli
2 sec.
✔
✔
100 mA - 40 V - 2.5 -16 Ω
Max 40 mA - 30 Vdc
From -10°C to + 40°C
From -20°C to + 60°C
30 V/m (80/2000 MHz)
✔
ABS
Swivel bracket / Snodo orientabile
114 x 63 x 40 mm
5
GS PRO - Installation manual v1.0 EN-IT
Need help?
Do you have a question about the GS PRO and is the answer not in the manual?