Secret Lab MAGNUS Pro Assembly Manual page 9

Sit-to-stand metal desk, switching integrated power supply column to the right side

Hide thumbs Also See for MAGNUS Pro:

Available languages

ASSEMBLY GUIDE

Connecting the Power Cord

Plug the Power Cord into the

socket located at the bottom of

the Left Motorized Leg Column.

Plug your desk into a 100V - 240V outlet.

Calibrating your Desk

Note: Your Motorized Leg Columns

have been lubricated to maintain

smooth operation. Some residue

is expected to be seen on the

Leg Columns after a few cycles.

Slide the Standby Switch to the right to

turn the Control Panel on. Press and hold

the

button. The display will show "

Do not release the button until a beep is

heard. The calibration process is completed.

WARNING: Do not use the Secretlab MAGNUS Pro

until all steps and calibration have been completed.

Standby Switch

(Off Position)

Standby Switch

(On Position)

Need help?

Do you have a question about the MAGNUS Pro and is the answer not in the manual?