Secret Lab MAGNUS Pro Assembly Manual page 7

ASSEMBLY GUIDE
Hint: If your power strip is large,
you can place it in the Cable Tray
now and drop the power strip cable
down into the Cable Tray opening
before the next step of assembling
the Hinged Rear Cover.
Route your power strip cable from
the underside to plug it into the
socket located at the front of the
Motorized Leg Column. If you plan
to install the Secretlab Premium
PC Mount on the same side, route
your power strip cable from the side
of the Motorized Leg Column instead.
Pro Tip: Your power strip
cable can be managed using the
Secretlab Magnetic Cable Anchors.
Route from Under
WARNING: Do not use the Secretlab MAGNUS Pro
until all steps and calibration have been completed.
OR
Route from Side
6