1. Manuals
  2. Brands
  3. BendPak Manuals
  4. Lifting Systems
  5. HD-7P
  6. Installation and operation manual

BendPak HD-7P Installation And Operation Manual

Four-post lifts
Hide thumbs Also See for HD-7P:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and Operation Manual
Models:
• HD-7P
• HD-7W
Original Instructions in
the English Language.
Read the entire contents of this manual before using this product. Failure to follow the
instructions and safety precautions in this manual can result in serious injury or death. Make sure all
other operators also read this manual. Keep the manual near the product for future reference. By
proceeding with installation and operation, you agree that you fully understand the contents of this
manual.
Four-Post Lifts
Manual P/N 5900041 — Revision N1 — April 2025
⚠
DANGER
30440 Agoura Rd.
Agoura Hills, CA 91301 USA
Toll Free: (800) 253-2363
bendpak.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD-7P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BendPak HD-7P

Summary of Contents for BendPak HD-7P

  • Page 1 Toll Free: (800) 253-2363 bendpak.com Four-Post Lifts Installation and Operation Manual Manual P/N 5900041 — Revision N1 — April 2025 Models: • HD-7P • HD-7W Original Instructions in the English Language. ⚠ DANGER Read the entire contents of this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death.
  • Page 2 Copyright - Copyright © 2025 by BendPak Inc. All rights reserved. You may make copies of this document if you agree that: you will give full attribution to BendPak Inc., you will not make changes to the content, you do not gain any rights to this content, and you will not use the copies for commercial purposes.
  • Page 3 Number, and the Date of Manufacture from the label on your unit. This information is required for part or warranty issues. Model: Serial: Date of Manufacture: Designed and engineered by BendPak Inc. in Southern California, USA. Made in China. HD-7W HD-7P...

  • Page 4: Table Of Contents

    HD-7W: Standard and wide widths, raises Vehicles up to 7,000 pounds (3,175 kg). • Both models are ALI certified. This manual is mandatory reading for all users of the HD-7P and HD-7W, including anyone who installs, uses, maintains, repairs, or wants to know more about them. ⚠...

  • Page 5: Shipping Information

    Keep this manual on or near the product for future reference. Read and follow the warnings and instructions on the labels on the product. Contact BendPak at (800) 253-2363 follow the prompts to reach customer service., or email support@bendpak.com...
  • Page 6 Service for more information about safely installing, using, and servicing your Lift. 27. HD-7P and W are Four-Post Service Lifts. Use them only for their intended purpose. 28. You must wear OSHA-approved (publication 3151) personal protective equipment at all times when installing, using, maintaining, or repairing the Lift.

  • Page 7: Liability Information

    • Use of the product for purposes other than those described in this manual. • Modifications to the equipment without prior, written permission from BendPak Inc. • Injury or death caused by modifying, disabling, overriding, or removing safety features. •...

  • Page 8: Components

    Ladder so that they do not engage as you lower the Runways. Used only to lower the Runways. Located next to the Power Post. • Safety Ladders. Part of the Safety Lock System installed at the back of the Post, somewhat resembles a Ladder. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 9 • WSA-100 Utility Station. Optional product that adds air and electric outlets to your Lift. Refer to the WSA-100 Utility Station page on the BendPak website for more information. • Aluminum Decks. Optional set of two Aluminum Decks let you store items, including motorcycles and ATVs, on your Lift.

  • Page 10: Specifications

    Specifications HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 11 85 in. is 50% of the Lift’s rated capacity or 3,500 lbs. when the rated capacity is 7,000 lbs. Additional voltages available. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 12: Frequently Asked Questions

    Passenger-Side. This will be explained later. Q: Does the Lift have to be anchored in place? A: Yes, BendPak strongly recommends that you anchor the Lift. If you plan to use the optional Rolling Bridge Jack, the Lift must be anchored.

  • Page 13: Installation Checklist

    35. Perform final leveling. ☐ 36. Install the Accessories. ☐ 37. Perform an Operational Test. ☐ 39. Review the Final Checklist. ☐ 26. Leave the Manual with the owner/operator. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 14: Installation

    Pay attention at all times. Use appropriate tools and lifting equipment. Stay clear of moving parts. BendPak recommends referring to the current version of the ANSI/ALI ALIS Standard Safety Requirements for Installation and Service for more information about safely installing, using, and servicing your Lift.

  • Page 15: Planning For Electrical Work

    For a 208 to 230 VAC, circuit, use a 20 amp fuse. three phase – For a 380 to 440 VAC, circuit, use a 15 amp fuse. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 16: Selecting A Location

    NOTICE A maximum shim of 2 in. (51 mm) is possible by ordering optional Shim Plates. Contact BendPak at (800) 253-2363, follow the prompts to reach customer service. • Concrete specifications. Do not install the Lift within 6 inches of cracked or defective Concrete.

  • Page 17: Checking Clearances

    60 in. (1,524 mm) Minimum distance to nearest obstruction 12 in. (305 mm) Min. Clearance Vehicle Height Top Lock 85.8 in. (2,181 mm) HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 18 RUNWAY LENGTH RUNWAY LENGTH RUNWAY LENGTH Do not to scale For more information about the BendPak Rolling Jacks, visit our Rolling Jacks website page. Deciding the Lift Orientation Before proceeding, decide how the Lift is to be oriented. This decision affects the Power Post and Runway positions, which are not interchangeable.

  • Page 19: Unloading And Unpacking

    You must have a Forklift or Shop Crane to move them into position. Use care when moving them. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 20 Posts and Runways can shift or even fall. If they fall on a person, they could cause serious injury. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 21: Creating Chalk Line Guides

    Do not forget to check the diagonals. 4. When you move the Posts into position, put the outside edges of the bases inside the corners created by the Chalk Line Guides. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 22: Moving The Posts Into Position

    Do not stand up the Posts at this point; some of the following procedures are easier to complete if the Posts are laying on the ground. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 23: Installing The Crosstubes

    Power Post location, but the Powerside Runway and Crosstube locations do. Windows are in the Crosstubes; they are shown here at the ends of the Powerside Runway for clarity. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 24 It is easy to see the top Slot created by the Slide Blocks. It is difficult to see the bottom Slot, but it is required that the Ladder go through both Slots. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 25: About Safety Locks

    Pushbutton Air Valve. While you hold down the pushbutton, the Primary Safety Locks are moved away from the Safety Lock holes in the Ladders; they are prevented from engaging, which allows the Runways to be lowered. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 26: Installing The Ladders And Top Cap

    Lift in danger. Not to scale. Not all components shown. Front and side views combined. Make sure to install each Ladder through both Slots on each Crosstube Gusset. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 27 The other hole in the middle of the Top Cap is for the Lifting Cable, installed later. 6. Install the other three Top Caps the same way. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 28: Raising The Crosstubes

    4. Once both Crosstubes are raised, all four Primary Safety Locks are engaged, and all four Slack Safety Locks have been disengaged, you can continue with the installation. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 29: Securing The Ladders

    Do not continue with the installation until you have visually confirmed that all four Primary Safety Locks are engaged. If they are not engaged, the Runways could move or fall, possibly causing personal injury (even death) or product damage. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 30 When you remove the Sheaves, keep all of the components together. You will be reinstalling them at the same location, using the same components. Not to scale. Not all components shown. Combines top and side views. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 31: Installing The Runways

    The Ramp locations do not change based on Power Post location, but the location and orientation of the Powerside Runway does. Not to scale. Not all components shown. Tops of Runways not shown. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 32 Do not continue with the installation until you have visually confirmed that all four Primary Safety Locks are engaged. If they are not engaged, the Runways could move or fall, possibly causing personal injury (even death) or product damage. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 33 3. On the inside of the Powerside Runway, screw the Plastic Nut back onto the Threads of the Flex Tube and tighten it. 4. Let the other end of the Flex Tube hang in place for now. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 34: Routing The Lifting Cables

    Before routing the Lifting Cables, you need to know the following: • BendPak strongly recommends using gloves when working with the Lifting Cables. • Each Lift has four Lifting Cables. All four are different lengths. Each Lifting Cable is the right length for one path.
  • Page 35 The following drawing shows the components involved in routing the Lifting Cables. Not to scale. Not all components shown. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 36 Not to scale. Not all components shown. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 37 4. Route the Threaded End of Lifting Cable A under where the Gusset Sheave will go when it is reinstalled, then route it up towards the top of the Post past the top of the Crosstube Gusset. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 38 Small Window near the bottom of Post C. 10. Once the Threaded End of Lifting Cable C is secured at its Top Cap, return to the Small Window at the bottom of Post C. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 39 Not to scale. Not all components shown. 17. Gather the unrouted portions of Lifting Cables A and C, making sure to orient Lifting Cable C above Lifting Cable A. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 40 Cable Anchor Plate (in the Gap, over the L section, back up against the Cable Anchor Plate, and with C on top and A on the bottom), and then reinstall the Bolts. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 41 Lifting Cables, depending on how far the Piston was extended. If you see slack in the Lifting Cables, this is normal. It will be taken up when using the Lift. Cables A and C Routing HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 42 8. Make sure the Button End and the unrouted part of Lifting Cable B is under the Large Window, near the bottom of Post B. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 43 Make sure to keep both Lifting Cables: in their correct positions (D on top, B on the bottom), sitting correctly in the Sheaves, and free from any entanglements. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 44 25. If you see slack in the Lifting Cables, this is normal. It will go away when you start using the Lift. Cables B and D Routing HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 45: Working With Compression Fittings And Tubing

    The Ferrule goes around the Rod and under the Threads. The Nut goes onto the Threads. 6. Tighten the Nut. Remember that the Ferrule can only be used once; do not tighten the Nut until everything is ready. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 46: Installing The Air Lines

    Air Cylinder on each Post. All four Air Cylinders must be set up correctly or you will not be able to get your Runways off their Safety Locks. Drawing not to scale. Some components not shown. Air Lines shown outside Steel Tubes for clarity. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 47 5. Leave the Power Unit end of the Air Line hanging out of the Flex Tube for now. It will be connected to the Pushbutton Air Valve later in the installation process. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 48 Hydraulic Hoses and Fittings on your Lift, making your new Lift inoperable. Your Lift is shipped with clean components; however, BendPak strongly recommends that you take secondary precaution and clean all Hydraulic Hoses and Fittings prior to making connections. It is better and less costly to take these extra steps now so that you do not need to take your Lift out of service later to fix issues that could have been prevented at the time of installation.
  • Page 49 Hydraulic System. Thread Sealant can be used with most Hydraulic Fittings, although you probably only need to use with NPT connectors. Apply the thread sealant when the ambient temperature is between +46.5°F to +70°F (+8°C to 21°C) HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 50 7. Leave the Straight end of the Hydraulic Hose coming out of the Flex Tube; it will be connected to the Power Unit later in the installation. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 51: Installing The Return Line

    7. Leave the Power Unit end of the Return Line hanging out of the Flex Tube for now. It will be connected to an Elbow Compression Fitting and to the Power Unit later in the installation. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 52: Installing The Power Unit

    Damage to the motor caused by water is not covered by the warranty. The Power Unit is heavy. BendPak recommends having one person hold the Power Unit while another person bolts it into place.
  • Page 53 Dexron VI, Mercon V, Mercon LV, or any synthetic multi- Vehicle automatic transmission fluid. Do not connect the Power Unit to a power source at this point. 3. Replace the Reservoir Cap. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 54 Includes the hole to which the Flex Tube connects. BendPak recommends orienting the Flex Tube so that the lines coming out of it are near where they connect on the Power Unit and to the Pushbutton Air Valve.
  • Page 55 5. Holding the Flex Tube by the Plastic Collar, put the Threads through the hole on the Flex Tube Angle Plate from underneath. 6. Screw the Plastic Nut back onto the Threads and tighten. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 56: Installing The Pushbutton Air Valve

    Use the two holes on the Pushbutton Air Valve on the side away from the actual pushbutton. If you use the holes next to the pushbutton, the Zero Angle Bracket interferes with the pushbutton when you try to use it. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 57 Double check to make sure you are attaching the Air Line to the Pushbutton Air Valve. For the customer-supplied air pressure, 3 to 25 cfm at 50 to 150 psi is required. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 58: Connecting The Return Line

    Power Unit and not the Air Line. Do not attach the Air Line to the Power Unit by mistake; it connects to the Pushbutton Air Valve. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 59 The Hydraulic Out and Return Line ports for HD-7P and HD-7W Power Units are shown below. Hydraulic Out ports on the Power Units are labeled P below, while Return Line ports are labeled R. Port labels on individual Power Units may be slightly different or may not be present at all.
  • Page 60 Power Out connector whose Shipping Plug you just removed. 4. Connect and securely tighten the Hydraulic Hose coming out of the Flex Tube to the JIC Connector of the JCI-to-ORB Fitting. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 61: Contacting The Electrician

    • a Thermal Disconnect Switch Refer to Wiring Diagrams for wiring information for your Lift’s Power Unit. Additional information is supplied in the sections describing these tasks. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 62: Connecting To A Power Source

    Electrical Box. Have the Electrician use that wiring information to wire the Power Unit to the power source. You can also find the Wiring Diagram for your Power Unit in Wiring Diagrams. 8. Close the Electrical Box. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 63: Installing A Power Disconnect Switch

    (NEC) requirement. They are designed to interrupt electrical power in the event of an electrical circuit fault, emergency situation, or when equipment is undergoing service or maintenance. BendPak strongly recommends that you install a Power Disconnect Switch that is properly rated for the incoming power. ⚠...
  • Page 64 Use only the Anchor Bolts that came with your Lift. Only install your Lift on a WARNING Concrete floor. Make sure to get the correct amount of Effective Embedment and use the correct amount of Torque. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 65: Anchoring The Posts

    Concrete or Anchor Bolts do not meet these specifications, it could lead to product damage, vehicle damage, personal injury, or even loss of life. BendPak Lifts are supplied with installation instructions and concrete fasteners meeting the criteria as prescribed by the American National Standard “Automotive Lifts – Safety Requirements for Construction, Testing, and Validation”...
  • Page 66 Do not shim a Post more than half an inch using the provided Shims. A maximum of 2 in. (51 mm) is possible by ordering optional Shim Plates. Contact BendPak at (800) 253-2363, then follow the prompts to order. Please have the model and serial number of your Lift available.

  • Page 67: Final Leveling

    Tools Required: Step Ladder, and Open End Wrenches. IMPORTANT! Do not stand on the runways while checking or adjusting the lift cables. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 68 Post C should measure 1/8 in. (3.1 mm) above the safety ladder cutout. o Post D (Longest Cable) should measure 3/16 in. (4.7 mm) above the safety ladder cutout. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 69 17. When satisfied the Lift is level and the Safety Locks are all engaging at roughly the same time, verify the Top Safety Ladder Nut, the Lift Cable and its Jam Nuts are all secured at the top of each Lift Post. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 70: Installing Accessories

    The accessories available for your Lift include: • Tire Stops. Installed at the Front of the Lift. Hold the Tires of the Vehicle in position. BendPak recommends chocking the rear Tires, so that the Vehicle stays in place. Included with the Lift.
  • Page 71 The oils from your hands will reduce the adhesive’s long-term effectiveness. IMPORTANT! BendPak recommends two people work together to install the Tape. One person removes the backing and applies the Tape to the Runway while the second holds the Tape in place over the guidelines marked on the Runway.
  • Page 72 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 73 9. Move the Lift to the desired location. 10. Raise the Lift to a locking position and engage it there. 11. Take off all four Caster Kit assemblies. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 74: Performing An Operational Test

    Follow the instructions in the GoAiR manual to mount the compressor on the HD-7 Lift Post. Performing an Operational Test BendPak strongly recommends doing an Operational Test of your Lift with a typical Vehicle before starting normal service (a typical Vehicle is not required but is recommended). ⚠...
  • Page 75 If the Lift is shaking, moving erratically, or squeaking (which is normal during the start-up period), repeat the procedure a couple more times, with at least a one-minute break between cycles. If you continue to have issues, refer to Troubleshooting for assistance. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 76 If it has not been done already, perform an Operational Test of the Lift with a typical Vehicle. Refer Performing an Operational Test. • Make sure a copy of the Installation and Operation Manual is left with the Lift. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 77: Operation

    Do not allow people inside a Vehicle you are going to raise. Make sure the Vehicle is not overbalanced on either end or either side. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 78: Using The Controls

    Pay close attention Pushbutton. while lowering the Lift! Verify all four 5. Make sure all four Posts are corners are engaged at same height. descending evenly! HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 79: Raising And Lowering Vehicles

    5. With the Runways engaged on the Safety Locks, check around the Vehicle to make sure everything looks good. If you see anything wrong, fix it before anyone gets near the Runways or goes under them. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 80 If one corner does not lower, stop immediately, clear the area of personnel and refer to the Troubleshooting Section of this manual. 6. Remove the Tire Chocks, then carefully drive the Vehicle off the Runways. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 81: Maintenance

    ⚠ WARNING: Do not operate your Lift if you find maintenance issues; instead, take the Lift out of service, then contact your dealer, visit bendpak.com/support, email support@bendpak.com, or call (800) 253-2363. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 82: Lubrication Procedure

    5. Remove the Sheave Pins and apply red lithium grease to the sheave Bore and the Sheave pins. 6. Reassemble the Pins into the Sheaves and secure. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 83 If you are unable to find an appropriate facility, the website earth911.com has resources that may be of help. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 84: Wire Rope Inspection And Maintenance

    Visually check for any broken wires. One way to check for crown breaks is to run a cloth along the rope to check for possible snags. d. With an awl, probe between wires and strands and raise any wires that appear loose. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 85: Torque Chart

    Torque Chart HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 86: Troubleshooting

    Lubricate the pins on all Sheaves using red lithium grease. If the Lift is new, a break-in period may be needed; run the Lift several times each day. If the noises persist, contact BendPak Support. Replace the older sheave pins with If you continue to have issues with your Lift, take it out of service, then contact your dealer, go to bendpak.com/support, email...

  • Page 87: Bleeding The Hydraulic Cylinder

    2. Once all four corners are equal, attempt to lower the Lift until it rests on the closest Safety Lock. This puts the Lift into a safe condition with all 4 Crosstube ends on their Safety Locks. 3. If the Lift cannot be put into a safe condition, then contact BendPak support, go to bendpak.com/support, email or call (800) 253-2363, then support@bendpak.com,...
  • Page 88 If you continue to have issues with your Lift, take it out of service, then contact your dealer, go to bendpak.com/support, email support@bendpak.com, or call (800) 253-2363. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 89: Wiring Diagrams

    Wiring Diagrams 5585205 120VAC, 60Hz., 1 Ph., 3HP 5585181 208-230VAC, 50/60Hz., 1 Ph. 2HP 5585182 460VAC, 3 Ph. 2HP HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 90 5585247, 208 or 460VAC, 50/60 Hz. 3 Ph., 3 HP HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 91: Labels

    Labels HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 92 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 93 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 94: Parts Drawings

    Parts Drawings HD-7P HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 95 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 96 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 97 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 98 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 99 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 100 HD-7W HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 101 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 102 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 103 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 104 HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 105: Maintenance Log

    ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 106 ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...

  • Page 107: Automotive Lift Institute (Ali) Store

    The ALI Store is your trusted source for workplace safety! Visit today and get the training and materials you need to work safely: http://www.autolift.org/ali-store/. HD-7P / HD-7W Four-Post Lifts P/N 5900041 — Rev. N1 — April 2025...
  • Page 108 30440 Agoura Rd. Agoura Hills, CA 91301 USA Toll Free: (800) 253-2363 bendpak.com ©2025 by BendPak Inc. All rights reserved.

This manual is also suitable for:

Hd-7w

Table of Contents