Numark MIXSTREAM PRO User Manual page 6

Features
Top Panel
1. Touchscreen: This full-color, multi-touch display shows information relevant to Mixstream Pro's current
operation. Touch the touchscreen (and use the hardware controls) to control the Mixstream Pro interface.
2. Browse Knob: Turn this knob to navigate through lists. Press the knob to move forward in the touchscreen or
select a song to load on either deck.
Press and hold Shift and press this knob to load the selected track to the Prepare list.
3. Load 1: Press this button to load the selected track to Deck 1.
Quickly double-press this button to instant double the track currently playing on Deck 2 to Deck 1.
4. Load 2: Press this button to load the selected track to Deck 2.
Quickly double-press this button to instant double the track currently playing on Deck 1 to Deck 2.
5. Back: Press this button to move back in the touchscreen.
6. View: Press this button to cycle between the
Hold Shift and press the View button to switch between simple view or horizontal and vertical waveform views in
Performance Mode.
7. Source / Lighting: Press this button to open the
Press and hold Shift and press this button to open the
8. Control Center: Press this button to open the
used settings and navigate to the
9. Shift: Press and hold this button to access secondary functions of other controls.
10. Channel Level: Turn this knob to adjust the level of the pre-fader, pre-EQ audio signal for the channel.
11. Channel EQ: Turn these knobs to boost or cut the high, mid-range, and low frequencies for the channel.
12. Filter: Turn this knob to apply a filter to the channel. Starting from the center (12:00) position, turn it counter-
clockwise to apply a low-pass filter, or turn it clockwise to apply a high-pass filter.
7
1
3 2
5
10
Library and
Source
Engine Lighting
Control Center
User Profile, Settings, Source, Wi-Fi, Record, and
8
4
6
10
Performance views.
menu.
menu.
menu, where you can quickly adjust commonly
Engine Lighting menus.
6