Control Panel Messages - Breville BBM100 Instructions And Recipes Manual

Control panel messages

eRRoR deteCtIoN
When the START/STOP button has been pressed to
begin the process and there is a problem relating
to the sensor, beeps will sound twice and then the
LED Screen will flash the particular error message
specific to the problem.
There are 4 different error messages:
eRRoR
meSSAge pRoBlem
e01
Attempting to use the bread machine
shortly after a loaf has been baked and its
interior will still be warm, that is the sensor
temperature will still be above 40°C.
e00
The bread machine is used in an extremely
cold environment.
eee
HHH
22
CoRReCtIoN
Press START/STOP to reset, open the lid,
remove the bread pan and allow the oven
cavity sufficient time to cool. Refer to
"Beginner's Guide to Baking Your First Loaf"
step 11, page 13.
Place the bread machine in a warmer
environment. Recommended room
temperature 20-25ºC.
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).