Canton Reference Manual
Hide thumbs
Also See for Reference:
- Owner's manual (21 pages) ,
- Manual (8 pages) ,
- Owner's manual (16 pages)
Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Canton Reference
Summary of Contents for Canton Reference
- Page 1 SUBWOOFER MANUAL...
- Page 2 Please read these operating instructions carefully before setting up and connecting your Reference Subwoofer. It will help you get the most Troubleshooting Page 32 out of your system. Canton has a distribution network in over 50 countries. If you have any questions, this team of experienced distributors, together with authorized dealers, will be happy to help. Warranty...
- Page 3 For devices without a mains switch, in which the mains plug or the mains socket serves as a switching device, the plug of the mains Proper installation and connection of the speaker is the responsibility of the operator. Canton cannot accept any responsibility for plug and/or the appliance coupler must be freely accessible at all times.
- Page 4 English English FURTHER IMPORTANT INFORMATION If sound distortions such as unnatural knocking, throbbing or high-frequency clicking occur during playback, the volume level must Information about the "intended use": be reduced immediately. To avoid possible hearing damage, do not listen at high levels for long periods of time. Interrupt the The subwoofer is designed for indoor use and must not be used outdoors or in a wet environment.
- Page 5 UNPACKING AND PLACEMENT SUBWOOFER MODULE Unpacking: The following module (CSP 502) is installed in the Reference Open the carton and if necessary, remove any metal clips. Carefully unpack the subwoofer and check that the carton content is undamaged. Subwoofer. If any part is damaged, do not use it, but please contact our customer service (see back page). Keep the packaging during the entire Detailed information about power consumptions and switch-off warranty period.
- Page 6 English English CONNECTION Caution: Amplifier and AV-Receiver without special subwoofer output: Connect the loudspeaker LOUDSPEAKER LEFT SUBWOOFER LOUDSPEAKER RIGHT Before connecting the subwoofer, switch off the source to be connected (AV-Receiver, amplifier, etc.)! Only connect the subwoofer to the outputs of the amplifier / AV-Receiver to the "High Level Input" (L and R) using a loud- HIGH LEVEL INPUT mains after connecting the source.
- Page 7 English English OPERATION AND SETTINGS 1. Mains switch: 6. Room Compensation: After connecting the subwoofer, switch it on (ON) at the mains switch. To deactivate the subwoofer completely (LED off), switch it off at the With the switch "Room Compensation" you can change the filter function in the low bass area. In the "Wide" position, the cut-off frequency mains switch.
- Page 8 English English TROUBLESHOOTING TROUBLESHOOTING Enclosed you will find an overview of the most frequently occurring problems with corresponding suggested solutions. Problem Possible reason Solution Problem Possible reason Solution The LED on the subwoofer 1. The power cord is not correctly connected 1.
- Page 9 Connect all devices with grounding plugs connected to the amplifier to a common power strip Canton provides a 2-year warranty for active and semi-active speakers as well as electronics. The warranty period begins on the date of (multiple socket).
- Page 10 Bei Fragen oder Anregungen wenden Sie sich bitte an unseren Kundenservice: For further questions, please do not hesitate to contact our Customer Service: Canton Elektronik GmbH + Co. KG Neugasse 21 – 23 61276 Weilrod, Germany Tel. +49 (0)6083 287-87 service@canton.de www.canton.de Alle Angaben ohne Gewähr.
Need help?
Do you have a question about the Reference and is the answer not in the manual?
Questions and answers