Advertisement
Quick Links
1
Aero Mount Vibration Isolator - Camera Gimbal
Support
(VI-AMLR-01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
2 x Clamps
Cheese Plate (Bottom)
Cheese Plate (Top)
2 x Allen Bolts
8 x Wire Configuration
(Size: 1/4" x 1")
8 x Elastic Tubes
Cable Tie
1mtr Elastic Tube
3/16" Allen Key
14mm & 15mm Spanner
2 x Washers
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PROAIM CINEMA VI-AMLR-01
Summary of Contents for PROAIM CINEMA VI-AMLR-01
- Page 1 Aero Mount Vibration Isolator - Camera Gimbal Support (VI-AMLR-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Aero Mount Vibration Isolator Setup Wire Configuration Assembly • Loosen the grub screw using a 3/16” Allen key. • Insert the wire configuration into place. • Re-tighten the grub screw again using a 3/16” Allen key. • Repeat the same process to insert the remaining wire configurations.
- Page 3 Cheese Plate (Bottom) Assembly • Loosen the grub screw on the bottom cheese plate using a 3/16” Allen key. • Next, insert the other end of the wire configuration into the bottom cheese plate. • Tighten the grub screw again using a 3/16” Allen key.
- Page 4 • Insert the bolt into the top cheese plate and mount the clamp. • Then, tighten the bolt using a 14mm spanner. • Mount the second clamp using the same process. • Remove the knobs and take the brackets out of the clamps.
-
Page 5: Gimbal Mounting
Quick Release Camera Plate Mounting • Attach the Quick release camera plate (Not included) to the bottom cheese plate. • Then, insert the Allen bolts (1/4” x 1”)." • Tighten the Allen bolts using a 3/16” Allen key. • The Quick release plate is now securely attached to the cheese plate. - Page 6 • Attach the Camera (Not included) to the Gimbal and securely lock it. • Your setup is ready to use.
- Page 7 YOUR PROAIM AERO MOUNT VIBRATION ISOLATOR ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the CINEMA VI-AMLR-01 and is the answer not in the manual?
Questions and answers