Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 1025TC-
T/1025TC-10G. Installation and maintenance should be performed by experienced
technicians only.
The SuperServer 1025TC-T/1025TC-10G is a 1U Twin (two serverboards in a 1U
chassis) rackmount server based on the SC809T-780B server chassis and two
Super X7DCT/X7DCT-10G serverboards. The X7DCT/X7DCT-10G supports dual
Intel® Xeon® 5400/5300/5200/5100 Series processors. See the Supermicro web
site for details.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7DCT/X7DCT-10G
serverboard and the SC809T-780B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 1025TC-
T/1025TC-10G into a rack and check out the server confi guration prior to power-
ing up the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
Advertisement
Table of Contents
