Robolink codrone EDU User Manual page 10

Quick take off
To start the motors, push both joysticks
downward, angling them toward the middle.
Then, push up on the left joystick to take off.
This method will take off more quickly than
the L1 method (see page 15).
Emergency Stop
Press and hold L1 and pull down on the left joystick.
CAUTION
Whenever possible, press and hold L1 to land safely. However, if the drone is
going to crash or at risk of getting damaged, you can use Emergency Stop to
shut off the motors. Memorize Emergency Stop, it will be useful if you lose
control of the drone when testing code.
Using Emergency Stop from above 10 ft or at high speeds could damage your
drone, so use it sparingly. It's always safest to catch your drone whenever
possible.
Change speed
Press L1 to change the speed between 30%, 70%, and
100%. The current speed is indicated in the screen's top
left corner with S1, S2, and S3.
16
While flying, these are the controls for the drone, using the joysticks. The following is
using Mode 2 controls, which is the default.
Up
Rotate right
Rotate left
Down
Trimming your drone
Drifting forward?
Press down
Drifting right?
Drifting left?
Press left
Press right
Drifting back?
Press up
Forward
Move left Move right
Backward
Trimming to prevent drift
Use the direction pad buttons to
trim the drone if it drifts when
hovering.
Trim in the opposite direction that
the drone is drifting.
17