Page 1
User manual Hot water heat pump NIBE F130 UHB EN 2442-1 731480...
Page 2
Quick guide Navigation Ok button (confirm/select) Up/down buttons (move/increase/reduce) Back button (back/undo/exit) A detailed explanation of the button functions can be found on page 9. How to scroll through menus and make different settings is described on page 10. Increase hot water volume true To temporarily increase the amount of hot water, first press the down button to mark menu 2 (water droplet) and then press the OK button twice.
F130 – An excellent choice 2 The heat pump – the heart of the house Heat pump function Contact with F130 Maintenance of F130 3 F130 – at your service Set the ventilation Set the hot water capacity Get information Adjust the heat pump...
Water heater VPD 10 normal) Serial number must always be given. Certification that the installation is carried out according to instructions in the accompanying installer manual and applicable regulations. Date __________________ Signed _________________________ Chapter 1 | Important information NIBE F130...
For the latest version of the product’s documentation, see nibe.eu. Serial number The serial number can be found to the left, on top of F130. This appliance can be used by children aged from 8 years and above and per-...
F130 – An excellent choice F130 is part of the generation of heat pumps that have been developed to supply your home with inexpensive and envir- onmentally friendly hot water in the most efficient way. Hot water production is safe and economical with an external water heater and integrated control system.
22 °C -3 °C 0 °C 0 °C 22 °C The temperatures are only examples and may vary between different installations and time of year. Värmekälla NIBE F130 Chapter 2 | The heat pump – the heart of the house...
Domestic hot water The heat energy that the refrigerant produces in the condens- er is retrieved by the domestic hot water which is heated to the set temperature. Chapter 2 | The heat pump – the heart of the house NIBE F130...
B C D E The information menu shows: • on starting. There is a display unit on F130, which is used to communic- ate with F130. Here you: • when the back button in the main menu is pressed. •...
Page 10
Press the OK button to confirm the value you have set. To undo and return to the original value, press the back button. Chapter 2 | The heat pump – the heart of the house NIBE F130...
See alarm management on page 17. Exhaust air installation EMPTYING Cleaning the ventilation devices If F130 is drained because the house will not be used for The building’s ventilation some time for example, the heat pump must be filled again devices should be cleaned...
If longer time changes are required use the holiday function. NOTE! The heat pump requires a minimum ventilation flow in order to work properly. An insufficient ventilation flow can result in an alarm and blocking of compressor operation. Chapter 3 | F130 – at your service NIBE F130...
When the time has run out F130 returns to the mode set in advanced menu 2.2. Select “off" to switch off temporary lux MENU 2.2 - COMFORT MODE This menu only appears if a water heater is docked to the heat pump.
Page 14
This menu has a sub-menu. MENU 2.9.1 - PERIODIC INCREASE period Setting range: 1 - 90 days Factory reset: activated, 7 days Chapter 3 | F130 – at your service NIBE F130...
You can see information for the 10 most recent alarms. To view the run status in the event of an alarm, mark the alarm and press the OK button. Information about an alarm. NIBE F130 Chapter 3 | F130 – at your service...
All settings that are available to the user (including advanced Set time and date and display mode here. menus) can be reset to default values here. After factory settings, user settings must be reset. MENU 4.6 - LANGUAGE Chapter 3 | F130 – at your service NIBE F130...
In the event of an alarm, a malfunction has occurred that • Fan speed in reduced mode. F130 cannot rectify itself. The display shows what type of – Enter menu 1 - "ventilation" and select "normal" alarm it is and lets you reset the alarm.
Page 18
– Check and adjust the condensation water hose. Chapter 4 | Disturbances in comfort NIBE F130...
Technical data Detailed technical specifications for this product can be found in the installation manual (nibe.eu). NIBE F130 Chapter 5 | Technical data...
SUPPLY TEMPERATURE The temperature of the heated water that the heat pump sends out to the heating system. The colder the outdoor temperature, the higher the supply line temperature be- comes. Chapter 6 | Glossary NIBE F130...
Menu system, 9 Room unit, 9 Disturbances in comfort Manage alarm, 17 Troubleshooting, 17 F130 – An excellent choice, 6 F130 – at your service, 12 Adjust the heat pump, 16 Get information, 15 Set the hot water capacity, 13...
Tel: +48 (0)85 66 28 490 Hannabadsvägen 5, 285 21 Markaryd Tel. +41 (0)58 252 21 00 biawar.com.pl Tel: +46 (0)433-27 30 00 info@nibe.ch info@nibe.se nibe.ch nibe.se For countries not mentioned in this list, contact NIBE Sweden or check nibe.eu for more information.
Page 24
WS release date: 2024-11-05 05:32 Publish date: 2024-12-19 12:38 This is a publication from NIBE Energy Systems. All product illustrations, facts and data are based on the available information at the time of the publication’s approval. NIBE Energy Systems makes reservations for any factual or printing errors in this publication.
Need help?
Do you have a question about the F130 and is the answer not in the manual?
Questions and answers