Page 1
MANUFAKTURER / MARKETING AND ADVERTISING: MyWam Sp. z o.o. OPERATION AND MAINTENANCE MANUAL Edition 2 / 2025-02-10 Special needs stroller VILA THIS IS MEDICAL DEVICE. USE IT ACCORDING TO THE INSTRUCTION MANUAL OR LABEL.
ATTENTION! Before using the stroller, each User is obliged to read the manual and act in accordance with its guidelines. ATTENTION! In the event of any medical incidents related to the presence of the VILA stroller, the Manufacturer must be immediately notified in writing by contacting it via registered letter or e-mail with acknowledgment of receipt.
Edition 2 / 2025-02-10 TABLE OF CONTENTS PURPOSE OF THE MANUAL ......................... 2 1. PURPOSE AND INDICATIONS FOR USE ....................5 2. PLATES ..............................5 3. SYMBOLS DESIGNATION .......................... 5 4. IMPORTANT INSTRUCTIONS AND SAFETY RULES ................... 6 5. GENERAL CONSTRUCTION OF THE STROLLER ..................7 6.
Page 4
Edition 2 / 2025-02-10 7.8. Rain cover (attached to adjustable canopy with window) ..............28 8. TECHNICAL SPECIFICATIONS OF THE VILA STROLLER ................28 8.1. Material composition of the stroller ....................29 9. DELIVERY AND TOOLS ........................... 29 10. ASSEMBLY AND DISASSEMBLY OF THE STROLLER ................29 11.
1. PURPOSE AND INDICATIONS FOR USE The VILA special needs stroller is a class I medical device indicated for use by those disabled children who, due to their health condition, cannot walk, stand or sit down independently. The device is intended for transporting and moving the above-mentioned persons in a sitting or semi-recumbent position.
It is forbidden to place additional weight on the stroller, in particular to place additional weight on the back of the backrest, e.g. a rucksack or bag. This may cause the VILA stroller to tip over and injure the user! This does not apply to original accessories dedicated to the VILA stroller that do not exceed the permitted load.
Edition 2 / 2025-02-10 6. STROLLER FUNCTIONS 6.1. Unfolding the stroller frame Pull down the transport lock Pull up the push handle While holding the tilt foot with your foot, pull the push handle upwards Page | 9...
Edition 2 / 2025-02-10 6.2. Folding the frame of the stroller Position the front wheels as follows Pull the handles on both sides of the frame upwards at the same time Attach transport lock Page | 10...
Edition 2 / 2025-02-10 Correct positioning of the front wheels when the stroller is folded 6.3. Transport lock. Putting on and taking off the transport lock Lock applied Removed lock 6.4. Front swivel wheels. Front wheels directional lock Wheel assembly Page | 11...
Edition 2 / 2025-02-10 Wheel dismantling Locking the front wheels Unlocking the front wheels 6.5 Rear wheels. Assembly and removal of rear wheels on axle Wheel assembly Page | 12...
Edition 2 / 2025-02-10 Wheel dismantling Assembly of axles Dismantling of axles 6.6 Push handle for the stroller Angle adjustment mechanism for the push handle Press the buttons on both sides and change angle of the push handle. Page | 13...
Edition 2 / 2025-02-10 Angle adjustment of the push handle 6.7 Central brake The central brake is used only and exclusively to completely lock the wheels - it does not have a dynamic braking function. NOTE! The brake condition should be checked regularly and any dirt and mud removed.
Edition 2 / 2025-02-10 6.9. Footrest Footrest height adjustment Minimum height Maximum height Footrest assembly Press the marked buttons and hook the footrest onto the pins on the frame. Folding footrest Note: To fold the footrest, it must fitted maximum adjustment height.
Edition 2 / 2025-02-10 6.10. Seat depth adjustment Pull the seat towards you or slide it in. Minimum seat depth Maximum seat depth NOTE: Use the marked knobs to adjust the seat depth. Once the seat depth is set, turn the knobs. 6.11.
Edition 2 / 2025-02-10 6.13. Safety barrier Barrier installation Demounting the barrier Press the button on both sides and insert or slide out the railing. 6.14. Adjustable canopy with window Mechanism for mounting the canopy to the frame of the pushchair Slide the attachment on the canopy into the attachment on the frame of the stroller.
Edition 2 / 2025-02-10 7.5. Winter gloves 7.6. Sleeping bag for legs (to be placed on the safety barrier) 7.7. Mosquito net (attached to adjustable canopy with window) Page | 27...
Edition 2 / 2025-02-10 7.8. Rain cover (attached to adjustable canopy with window) 8. TECHNICAL SPECIFICATIONS OF THE VILA STROLLER stroller length 97-108 cm width of the stroller 61 cm height of the stroller 122 - 135 cm total weight...
• On the basis of the specification check the package content (in case of any missing elements contact your Seller). No tools are required to assemble and dismantle the VILA stroller. 10. ASSEMBLY AND DISASSEMBLY OF THE STROLLER • Assembly of the stroller. The product, pre-packed in the original carton, is already pre-assembled.
Edition 2 / 2025-02-10 install selected items of equipment dedicated to the seasons: sleeping bag for legs, winter gloves, mosquito net, rain cover, sun umbrella. • Dismantling the stroller: a) remove additional equipment , b) fold the footrest and frame of the pushchair, c) unfasten the rear wheels, d) fold the stroller by closing it with the transport lock.
Edition 2 / 2025-02-10 13. GETTING IN AND OUT OF A STROLLER When getting in and out of the stroller, place the stroller as close as possible to a stable and safe place to which the user will be changing their position. After making sure that the central brake is engaged and the footrest is raised to avoid standing on it, the user may transfer.
A COLLISION IT DOES NOT MOVE AND DOES NOT POSE A THREAT TO PASSENGERS. THE STRUCTURE OF THE VILA STROLLER CAN BE DAMAGED AS A RESULT OF A ROAD ACCIDENT. BEFORE USING THE STROLLER AGAIN AFTER SUCH AN EVENT, IT IS NECESSARY TO CARRY OUT AN INSPECTION AT THE MANUFACTURER'S AUTHORIZED SERVICE CENTER.
Page 33
ISO 10542. Both the four-point belt fastening system as well as the chest and hip belts are not part of the VILA stroller equipment and are not added by the Manufacturer. They are the equipment of an adapted motor vehicle.
Page 34
Edition 2 / 2025-02-10 ➢ Make sure that the lap and chest belts are not moved away from the body by elements of the stroller, e.g. pads or wheels. ➢ The hip belt should fit tightly to the front of the body, close to the hip joints. ➢...
Edition 2 / 2025-02-10 Do not attach the stroller with additional elements or accessories, i.e. wheels, footrest, push handle, etc. 20. CLEANING AND CARE The upholstery can only be washed by hand at up to 30 Stains should be removed as soon as they form on the surface of the stroller. ATTENTION: Do not clean with chemicals containing solvents and bleach.
Edition 2 / 2025-02-10 22. SERVICE AND PERIODIC INSPECTIONS For safe and trouble-free use of the stroller, it is necessary to regularly and thoroughly submit it to the inspections and servicing described below. In a situation where the stroller user is not able to carry out the above-mentioned activities on their own, they should return the stroller to a specialized stroller service point or directly to the Manufacturer, who will properly carry out the inspection and necessary servicing activities.
Medical Device Class I in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices. The manufacturer has issued a relevant declaration of conformity for the product, which can be found at www.mywam.eu Page | 37...
Edition 2 / 2025-02-10 26. WARRANTY CARD Series and number: ......... Purchase date: ......- ......- ......Seller stamp and signature: ......................................................................................................Warranty conditions • The seller grants the buyer a warranty for the purchased cart, for a period of 24 months, starting from the date of purchase.
Need help?
Do you have a question about the VILA and is the answer not in the manual?
Questions and answers