Related Manuals for MyWam in.basic Mewa
Summary of Contents for MyWam in.basic Mewa
- Page 1 PODSTAWA 1 / 2022-09-09 Operating manual Addition to the operating manuals for particular special needs strollers Edition / 2022-09-09 Indoor base in.basic Additional equipment to special needs strollers Mewa/Mouse/ Grizzly P a g e...
- Page 2 INDOOR BASE in.basic 1st Edition / 2022-09-09 Unfolding of the indoor base Pick up the folded frame, lock the brakes, unfold the lateral support and tighten it with the star knobs at the bottom of the frame (Pict. 1) (Pict. 1) Unfold the crossbeams, set the required angle and tighten the star knobs fixing it to the main frame.
- Page 3 INDOOR BASE in.basic 1st Edition / 2022-09-09 Height of the handle should be adjusted in accordance with needs of the user (Pict. 6 – 7). In order to change its angle press buttons located at both sides of the handle and set the new position afterwards. Mewa/Mouse Mounting of the seat Seat can be mounted backwards or forwards towards the direction of travel.
- Page 4 INDOOR BASE in.basic 1st Edition / 2022-09-09 Pict. 10 Pict. 11 Dismounting of the seat In order to dismount the seat, press the two white buttons located at both sides of the frame towards the ground (Pict. 12). Next pull the seat out of the seat mounts. Pict.
- Page 5 INDOOR BASE in.basic 1st Edition / 2022-09-09 b) Fix the adapter on the frame mounts and push it until characteristic “click” sound appears. The “click” sound coming from both sides of the locking mechanism a signal for a proper installation of the adapter (Pict.
- Page 6 INDOOR BASE in.basic 1st Edition / 2022-09-09 In order to dismount the seat proceed in accordance with the sequence as below: a) Lock the brakes to fix the indoor base in a static and stable position b) pull back the rear crossbeam to unlock the front seat mount (Pict. 19). Pict.
- Page 7 INDOOR BASE in.basic 1st Edition / 2022-09-09 Pict.21 Pict. 22 ATTENTION! Before locking the height mechanism make sure both left and right arm are at the same height! • lock the clamps (clap handles should be turned left) (Pict. 23) and push the frame to check if the height adjustment mechanism is locked properly.
- Page 8 INDOOR BASE in.basic 1st Edition / 2022-09-09 Before folding the indoor base make sure to lock the brakes and set the handle in the exit position (Pict. 24) Pict. 24 In order to fold the base first remove the seat and set it at the lowest possible height (i.e. marked with number 1).
- Page 9 INDOOR BASE in.basic 1st Edition / 2022-09-09 ATTENTION! All adjustments of both indoor base and its elements must be carried out without the user sitting in the base. Failure to comply with this requirement may cause serious threat for the health of the user! Plates •...
Need help?
Do you have a question about the in.basic Mewa and is the answer not in the manual?
Questions and answers