Download
Share
Print this page
GreenWorks SNF401 Operator's Manual
  1. Manuals
  2. Brands
  3. GreenWorks Manuals
  4. Snow Blower
  5. SNF401
  6. Operator's manual
GreenWorks SNF401 Operator's Manual

GreenWorks SNF401 Operator's Manual

Hide thumbs Also See for SNF401:

Advertisement

Quick Links

Download this manual
EN
SNOW THROWER
OPERATOR MANUAL
www.greenworkstools.com
SNF401

Advertisement

loading
Need help?

Need help?

Do you have a question about the SNF401 and is the answer not in the manual?

Questions and answers

Related Manuals for GreenWorks SNF401

Summary of Contents for GreenWorks SNF401

  • Page 1 SNOW THROWER OPERATOR MANUAL www.greenworkstools.com SNF401...

  • Page 3: Table Of Contents

    English Remove the battery pack......9 Description........4 Operation........9 Purpose............4 Overview............ 4 Cold weather operation......9 General power tool safety Start the machine........9 Stop the machine........9 warnings........4 Adjust the discharge chute....... 10 Preparation..........4 Adjust the chute deflector......10 Training............4 LED headlights.........

  • Page 4: Description

    English DESCRIPTION PREPARATION • Thoroughly inspect the area where the appliance is PURPOSE to be used and remove all doormats, sleds, boards, This machine is used to remove and clear away snow wires, and other foreign objects. from pavements, gardens, driveways and other ground- •...

  • Page 5: Operation

    English • Exercise caution to avoid slipping or falling, • Never operate the appliance without good visibility especially when operating in reverse. or light. Always be sure of your footing, and keep a firm hold on the handles. • Do not use on graveled surfaces. •...

  • Page 6: Symbols On The Product

    English the specified range may damage the battery and Symbol Explanation increase the risk of fire. Keep feet out of impeller. Keep • Recharge only with the charger specified by the feet away from rotating impeller. manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

  • Page 7: Installation

    English Save these instructions. INSTALLATION WARNING Do not change or make accessories that are not recommended by the manufacturer. WARNING Do not put in the safety key or the battery pack until you assemble all the parts. UNPACK THE MACHINE WARNING Make sure that you correctly assemble the machine before use.

  • Page 8: Install The Chute Control Rod

    English 3. Align the arrows in the discharge chute and snow thrower deck. Make sure the discharge chute faces forward. 4. Put the end of the chute control rod (6) straight through the hole (5) in the bracket. Keep the grip handle down.

  • Page 9: Remove The Battery Pack

    English 4. When you hear a click, the battery pack (2) is COLD WEATHER OPERATION installed. The safe battery operation temperature ranges from 1°F (-17°C) to 113°F (45°C). WARNING Do not store or charge battery outside. Battery must be charged and stored indoors prior to use of the machine.

  • Page 10: Adjust The Discharge Chute

    English WARNING Remove the battery after you complete the work. ADJUST THE DISCHARGE CHUTE You can adjust the discharge chute 180° to change the snow direction. 1. Turn the grip handle (1) left to move the discharge chute (2) to the left. 3.

  • Page 11: Maintenance

    English • Do not use the scraper to remove compact snow and ice. MAINTENANCE WARNING Remove the safety key and battery pack from the machine before maintenance. CAUTION Use only approved replacement parts. CAUTION Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts.

  • Page 12: Replace The Impeller

    English 4. Reinstall the mounting screws and spacers and tighten them. REPLACE THE IMPELLER WARNING Use only approved replacement scrapers. 1. Remove the 5 screws and side wear pad that secure the right side cover. 4. Remove the belt. 2. Remove the nut. 5.

  • Page 13: Store The Machine

    English 8. Reinstall the nut and right side cover. 6. Remove the screws that secure the left side plate. 9. Reinstall the left side plate, large pulley, belt and left side cover. 7. Pull the axle and remove the old impeller, install the new impeller.

  • Page 14: Troubleshooting

    English • Tighten the bolts. TECHNICAL DATA • Speak to a person at an approved service center. Voltage 40 V • Store the machine in a dry area. • Make sure that children cannot come near the No load speed 1900 RPM machine.
  • Page 15 It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by Greenworks. USA address: Greenworks Tools P.O. Box 1238, Mooresville, NC 28115 Canadian address: Greenworks Tools Canada, Inc.
  • Page 16 www.greenworkstools.com P0800703-05 Rev B1...