Related Manuals for GreenWorks SN-120-T
Summary of Contents for GreenWorks SN-120-T
- Page 1 40V Cordless Snow Shovel SN-120-T Owner’s Manual TOLL-FREE HELPLINE: 1-833-493-5483 www.greenworkselite.com Read all safety rules and instructions carefully before operating this tool.
-
Page 3: Table Of Contents
CONTENTS Contents ..........................2 ......................2 Important Safety Information ....................3 Symbols ..........................7 Know Your Snow Shovel ...................... 9 Assembly Instruction ......................10 Operation Instruction ......................14 Maintenance ........................16 Environmentally Safe Battery Disposal ................21 Troubleshooting ......................... 22 Limited Warranty ........................ -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS W A R N I N G Read all safety warnings and all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. Save all warnings and instructions for future reference. The term “power tool”... - Page 5 IMPORTANT SAFETY INSTRUCTIONS • Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts. • Wear rubber boots when operating the power tool. Do not operate the equipment when barefoot or wearing open sandals. Always wear substantial footwear. •...
- Page 6 • Maintain the power tool with care. Follow the instructions for lubricating and changing accessories. W A R N I N G Use only Greenworks Elite approved replacement batteries, other batteries may cause injury or damage to the snow shovel. SAVE THESE INSTRUCTIONS...
- Page 7 IMPORTANT SAFETY INSTRUCTIONS W A R N I N G ( P R O P O S I T I O N 6 5 ) Using this product will expose you to a chemical known to the State of California to cause cancer. Using this product will expose you to a chemical known to the State of California to cause birth defects or other reproductive harm.
-
Page 8: Symbols
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. DESIGNATION/EXPLANATION SYMBOL Voltage Current Frequency (cycles per second) Watt Hour - Energy Storage Capacity Amp Hour - Current Capacity Direct current... - Page 9 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not DANGER avoided, will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, WARNING could result in death or serious injury.
-
Page 10: Know Your Snow Shovel
KNOW YOUR SNOW SHOVEL Read this operator's manual and safety rules before operating your snow shovel. Compare the illustration in Figure 1 to your snow shovel in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Trigger switch Battery compartment... -
Page 11: Assembly Instruction
ASSEMBLY INSTRUCTION PACKING LIST PART NAME FIGURE Snow shovel Auxiliary handle Handle knob Owner's manual UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. •... - Page 12 ASSEMBLY INSTRUCTION CONNECTING THE SHAFTS (See Figure 2) • Align the pin on the handle shaft and the hole on the lower shaft. • Once the two shafts are secured, turn the lock knob clockwise until it is fully tightened. Hole Handle shaft Lower shaft...
- Page 13 ASSEMBLY INSTRUCTION TO INSTALL BATTERY PACK (See Figure 3) • Slide the battery (1) down to lock it into position. The battery is fully inserted into the snow shovel when you hear an audible “click”. Fig. 3 TO REMOVE BATTERY PACK (See Figure 3) •...
- Page 14 CONTENTS ASSEMBLY INSTRUCTION ATTACHING THE AUXILIARY HANDLE (See Figure 4) • Press the auxiliary handle (1) onto the upper shaft so that the handle is angled toward the rear handle that allows for comfortable operation. • Slide the auxiliary handle over the metal ring (2) and ensure the metal ring fits between the slot on the auxiliary handle.
-
Page 15: Operation Instruction
CONTENTS OPERATION INSTRUCTION STARTING THE SNOW SHOVEL (See Figure 5) In order to avoid serious injury, the operator and unit must be in a stable position when starting the snow shovel. Follow this sequence exactly in order to start the snow shovel. •... - Page 16 OPERATION INSTRUCTION USING THE SNOW SHOVEL (See Figure 6) • Start the snow shovel by following the Starting Instructions. The depth and weight of the snow will determine the forward speed. • Push the snow shovel forward so that it rides on the scraper. Scraper Fig.
-
Page 17: Maintenance
MAINTENANCE REPLACING THE SCRAPER (See Figures 7-8) W A R N I N G IN ORDER TO AVOID SERIOUS PERSONAL INJURY, TURN THE SNOW SHOVEL OFF AND REMOVE BATTERY BEFORE PERFORMING ANY MAINTENANCE. Use only the manufacturer's original replacement parts. •... - Page 18 MAINTENANCE STORAGE • Allow the motor to cool down before storing. • Store the snow shovel in a locked location in order to prevent unauthorized use or damage. • Store the snow shovel in a dry, well-ventilated area. • Store the snow shovel out of the reach of children. CLEANING •...
- Page 19 MAINTENANCE IMPELLOR REPLACEMENT screw Washer • Remove the right side • Pull the belt tensioner (idler • Remove the belt. cover by removing 6 arm) away from the drive screws. pulley. Be sure not to lose the washer and screw left. •...
- Page 20 MAINTENANCE IMPELLOR REPLACEMENT • Replace and tighten the • Replace and tighten the • Replace and tighten the remaining nut to secure the remaining screws to secure remaining screws to secure left side plate assembly. the left side cover. the pulley assembly. •...
- Page 21 MAINTENANCE COLD WEATHER OPERATION (See Figure 9) Lithium Ion batteries can be safely used from temperatures ranging from -17 degrees to 45 degrees Celsius. NOTE: Do not store or charge battery outside. Battery must be charged and stored indoors prior to use of the snow thrower. Unit may not start if its temperature is -17˚C or lower.
-
Page 22: Environmentally Safe Battery Disposal
ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this tool: Lithium-Ion, a toxic material. W A R N I N G All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. -
Page 23: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Charge the battery by following the The battery is not charged. procedures in the battery and charger manual. Press and hold the lock-out button, The lock-out button or trigger while holding the lock-out button, press switch were not used properly. -
Page 24: Limited Warranty
(3) years against defects in materials, parts or workmanship. GREENWORKS ELITE, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for... -
Page 25: Exploded View
EXPLODED VIEW... -
Page 26: Parts List
PARTS LIST ITEM NO. PART NO. QTY DESCRIPTION KIT, HANDLE HOUSING ASSEMBLY 311101477 KIT, TRIGGER SWITCH ASSEMBLY 311111477 KIT, AUXILIARY HANDLE ASSEMBLY 311021456 KIT, POWER CORD ASSEMBLY 311121477 KIT, IRON CLIP ASSEMBLY 311211437 KIT, LOWER SHAFT ASSEMBLY 333041468AE KIT, LEFT SIDE COVER ASSEMBLY 311131477 KIT, UPPER HOUSING ASSEMBLY 311141477... - Page 27 TOLL-FREE HELPLINE: 1-833-493-5483...
Need help?
Do you have a question about the SN-120-T and is the answer not in the manual?
Questions and answers