Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support HYDRAULIC PUNCH DRIVER USER'S MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Page 3
-Thread the punch completely onto the draw stud. All of the punch threads must be engaged by the draw stud threads. Incomplete assembly could cause a component failure. 4) Replace worn, damaged or missing components with Vevor replacement parts. Worn or damaged components can fail, resulting in injury or property damage.
OPERATION Step1: Before punching, drill a lead hole Ф 11.5mm by electric drill on the metal sheet.(No.2) Select appropriate punch(No.3 and No. 1) set and the right bolt (No. 12) at first. Attention: The diameter of round punch below 22mm, use M 10X1""bolt(called small bolt). The diameter of round punch above 22mm,use M 20X1.5""It(called big bolt).
Page 7
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao 1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 8
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the SYK-8B and is the answer not in the manual?
Questions and answers