VEVOR SYD-580-V1 User Manual

VEVOR SYD-580-V1 User Manual

Paste liquid filling machine

Advertisement

Technical Support and E-Warranty Certificate
www.vevor.com/support
PASTE LIQUID FILLING MACHINE
L
USER MANUA
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SYD-580-V1 and is the answer not in the manual?

Questions and answers

Zindulka
June 16, 2025

Dobrý den, když zapnu stroj, tak svítí jen levý panel a pravý ne a tím pádem nelze vůbec ovládat zařízení. czech republic

User image 6850228f373c1

Summary of Contents for VEVOR SYD-580-V1

  • Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support PASTE LIQUID FILLING MACHINE USER MANUA We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 3: General Safety Rules

    1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. 2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. GENERAL SAFETY RULES Important reminder 1.Before use, please carefully read the product manual and ensure that you understand and comply with all safety warnings and usage precautions.
  • Page 4 3. When foreign objects are found on the surface of the product, please immediately stop using and remove the foreign objects before continuing to use. 4. When using this product continuously for a long time, please rest in good time to avoid excessive fatigue. 5.
  • Page 5 MODEL AND PARAMETERS SYD-5 SYD-5 SYD-5 SY-65 SY-65 SYD-6 SYD-6 SYD-6 SY-65 Model 80-V1 80-V2 80-V3 0-V2 0-V3 50-V1 50-V2 50-V3 0-V1 All free-flowing pastes and All free-flowing pastes and All free-flowing pastes and liquids (no particles) such liquids (no particles) such liquids (no particles) such Suitable as Soy sauce, beverages,...
  • Page 6: Structure Diagram

    STRUCTURE DIAGRAM SYD-580-V1,SYD-580-V2,SYD-580-V3 1.Speed Knob 2. Switch 3. Control Panel 4. Outlet Hose and Filling Nozzle(Double) 5.Built-up Bracket 6. Power Switch and AC Power Socket 7.Inlet Hose and Filter(Double) 8. Pedal Switch 9. Outlet(Double) 10. Inlet(Double) SY-650-V1, SY-650-V2, SY-650-V3 1. Speed Setting 2.
  • Page 7 SYD-650-V1,SYD-650-V2,SYD-650-V3 1. Speed Setting 2. Control Panel 3. Outlet Hose and Filling Nozzle(Double) 4.Built-up Bracket 5.Power Switch and AC Power Socket 6.Pedal Switch 7.Peristaltic Pump 8.Inlet Hose and Filter - 6 -...
  • Page 8 COMPONENTS SYD-580-V1 SY-650-V1 SYD-650-V1 Model SYD-580-V2 SY-650-V2 SYD-650-V2 Parts SYD-580-V3 SY-650-V3 SYD-650-V3 Power Cord ×1 ×1 ×1 Cross Connector ×1 ×1 ×1 Hex Wrench ×1 ×2 ×2 ×2 ×2 ×2 Rubber Head ×4 ×2 ×4 Screw(M6) Filling Nozzle ×6 ×2 ×6...
  • Page 9 OPERATING INSTRUCTIONS 1. Insert the rod into the c ross 2.Insert the other rod into the cross connector to lock. connector 3.Install the above-installed rods on 4.Install fixed blocks on rod and lock the T clamp as shown. with rubber head screws. SY-650 Note:There is only one model and two model SYD-650,...
  • Page 10 5. Insert the filling nozzles into the 6. Connect the pedal switch as fixed blocks. shown. Note:SYD-580,SYD-650 are double SY-650 filling nozzles . is single filling nozzle. 7.Insert the power cord as shown. 8.Product assembly completed. Note:The built-up Bracket and the filling nozzles can be adjusted as needed.
  • Page 11 The operating instructions *Button function introduction: 1,Set/exit button:Press it one time to set the filling/waiting time in the standby state. And can exit the setting mode if you press it one time again. 2,Move button:Move the cursor from left to right or to opposite direction 3,Add/unit button:Can adjust the setting number from 0-9 circularly 4,Reset button:Can restart the filling count from 0 5,Inching button:Can pull out the air inside the silicone tube and pump by...
  • Page 12 Operation example Firstly,Please let the machine stop filling .or please ensure that the machine is in standby/stop state by press” auto ” key.((The machine will enter the standby station ,if you press “auto” key one time when it works with the automatic mode.The “auto” indicator will be off); Secondly,adjust the filling time and waiting/interval time,filling speed.
  • Page 13: Maintenance

    press action mode to start filling if you choose the required mode. Manual mode means the machine will work only when you press the “manual” button or press” foot pedal”.it will fill one time when you press one time. The machine will not work if you don’t press it. MAINTENANCE 1.It is better to clean the machine with clean water after every use, which can prolong the service life of the pump.
  • Page 14: Troubleshooting

    TROUBLESHOOTING Problem Possible Cause Possible Solution Machine first use or long You need to add some time no use, very few will water from the intake pipe Not absorbing water not absorb water, because to the pump and then start the pump internal dry the machine.
  • Page 15 Address:Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom...
  • Page 16 Technical Support and E-Warranty Certificate www.vevor.com/support...

Table of Contents