Related Manuals for FOOTAGE C50-A3
Summary of Contents for FOOTAGE C50-A3
- Page 1 Owner’s Manual C50-A3 Manual Squeeze Off Tool Phone (905) 695-9900 Toll Free 1 (888) 737-3668 54 Audia Crt. Vaughan, ON, Canada L4K 3N4...
-
Page 2: Safety Warning
Ensure the grounding system is properly planted in the soil to reduce the chances of static discharge. Do not modify or alter the tool in any way. Only use Footage Tools replacement parts provided by the manufacturer or authorized distributor. - Page 3 C50-A3 Manual Squeeze Off Tool for PE Pipe DO NOT OPERATE THESE TOOLS UNLESS THESE INSTRUCTIONS HAVE BEEN CAREFULLY READ AND UNDERSTOOD SAFETY WARNING: WARNING: WHEN OPERATING THIS TOOL, SAFETY EQUIPMENT INCLUDING SAFETY GLASSES ARE REQUIRED BEFORE PERFORMING A SQUEEZE, CLEAN THE POCKETS ON UNDERSIDE OF LOWER BAR AND WHERE THE SIDE SHAFT WILL CONTACT THE LOWER BAR.
-
Page 4: Preliminary Assembly
C50-A3 Manual Squeeze Off Tool for PE Pipe DO NOT OPERATE THESE TOOLS UNLESS THESE INSTRUCTIONS HAVE BEEN CAREFULLY READ AND UNDERSTOOD PRELIMINARY Location of ground ASSEMBLY: spike hole Verify the connection of the Static grounding kit (C615- B105), lead is mounted to the top bar, left hand corner with the 1/4"... - Page 5 C50-A3 Manual Squeeze Off Tool for PE Pipe DO NOT OPERATE THESE TOOLS UNLESS THESE INSTRUCTIONS HAVE BEEN CAREFULLY READ AND UNDERSTOOD OPERATING INSTRUCTIONS: B. Squeezing the Pipe Set the gauge plate stops on either side of the unit to the proper pipe size and SDR setting.
- Page 6 C50-A3 Manual Squeeze Off Tool for PE Pipe DO NOT OPERATE THESE TOOLS UNLESS THESE INSTRUCTIONS HAVE BEEN CAREFULLY READ AND UNDERSTOOD OPERATING INSTRUCTIONS: C. RELEASING THE PIPE Remove the tool in a controlled manner. Avoid sudden release of mechanical pressure. Controlled release is necessary so flow control may be quickly reestablished if required.
- Page 8 FOOTAGE TOOLS INC. within thirty (30) days from the date of purchase. This warranty and any possible liability of FOOTAGE TOOLS INC. hereunder are in lieu of all other warranties, expressed, implied, or statutory, including, but not limited to, any warranties of merchantability or fitness for a particular purpose.
Need help?
Do you have a question about the C50-A3 and is the answer not in the manual?
Questions and answers