BlacklineSafety G7 Getting Started Manual

Hide thumbs Also See for G7:

Download this manual

G7 GETTING STARTED GUIDE

G7 is a portable lone worker, single-gas, or multi-gas detector. Depending on your device cartridge,

G7 continuously measures gas concentrations in the ambient environment and activates

notifications when concentrations exceed setpoints.

HARDWARE

G7's menu lets you access functions such as gas

options, settings, and advanced information.

To use G7's menu:

From the Home screen, press the OK

button. The Main menu opens.

Use the up and down arrow keys to

navigate to your selection.

Press OK to select the menu item.

SOS ALERT

Pull down G7's red latch to signal for help.

NOTE:

Your Blackline Live administrator must enable this feature.

Rev. 12

POWERING OFF

To power off G7c and G7x:

Ensure the device has a solid green

connectivity light.

Press and hold the power button to start

the shutdown sequence.

When the lights and vibrations stop, G7c is

successfully logged off from Blackline Live

and G7x is successfully disconnected from

G7 Bridge.

G7 Getting Started Guide | 1

2025-04-21

Need help?

Do you have a question about the G7 and is the answer not in the manual?

Page 1 G7 GETTING STARTED GUIDE G7 is a portable lone worker, single-gas, or multi-gas detector. Depending on your device cartridge, G7 continuously measures gas concentrations in the ambient environment and activates notifications when concentrations exceed setpoints. HARDWARE MENU POWERING OFF G7’s menu lets you access functions such as gas To power off G7c and G7x: options, settings, and advanced information.
Page 2 G7 GETTING STARTED GUIDE NOTIFICATIONS G7 communicates notifications using lights, sound, vibration, and an on-screen message specific to the event. You must acknowledge the notification and address the triggering condition(s) before you can clear it. WARNING: Follow your company’s safety protocol for responding to notifications. For low- and high- urgency notifications, Blackline Safety recommends leaving the area.
Page 3 Press the OK button to open the Main menu. Select Modes, then select the desired mode. Attach the tube, then perform a block test by following the instructions on G7’s screen. G7’s screen inverts and the pump icon in the banner indicates pump is running.
Page 4 • Flow rate triggered. Sample timer • LEARN MORE Visit support.blacklinesafety.com to find support and training materials for G7, including the comprehensive G7 Technical User Manual. TECHNICAL SUPPORT North America (24 hours) United Kingdom (8am-5pm GMT) International (24 hours) Toll Free: 1-877-869-7212...