• Please note that the garden pump is not suitable for
continuous operation (e.g. for watercourses in gar-
den ponds). Regularly check the product for proper
function.
• Please note that lubricants are used in the product,
which may cause damage or contamination due to
leakage. Do not use the garden pump in garden
ponds with fish or valuable plants. If lubricants leak
out, they may contaminate the liquid.
• Do not carry or attach the product by the cable or
hose.
• Protect the product against frost and running dry.
• Only use original spare parts and accessories and
do not modify the product.
• Please read the information on "Cleaning, mainte-
nance, storage" in the operating manual. All addi-
tional measures, in particular opening the product,
must be carried out by a qualified electrician. In the
event of repair, always contact our service centre.
Electrical safety instructions
• When operating the product, the power plug must
be freely accessible after installation.
• Before you put your new garden pump into opera-
tion, have it professionally tested:
- Earthing, connection of the neutral line and resid-
ual current circuit breaker must comply with the
safety regulations of the power supply companies
and function properly,
- Protect the electrical plug connections from mois-
ture.
- If there is a risk of flooding, fit the plug connec-
tions in the flood-proof area.
• Ensure that the mains voltage corresponds to the
specifications on the type plate.
• Carry out the electrical installation in accordance
with the national regulations.
• Only connect the product to a socket with a residual
current circuit breaker (FI switch) with a rated resid-
ual triggering current of up to 30 mA; Fuse at least
6 amps.
• Before each use, always check the product, cable
and plug for damages. Defective cables must not be
repaired but replaced with a new ones. Have prod-
uct damages repaired by a specialist.
• If the connection cable for the product is damaged
then it must be replaced by the manufacturer or
their customer services personnel or by a similarly
qualified person, in order to avoid hazards.
• Do not use the cable to pull the plug out of the out-
let.
• Protect the cable from heat, oil and sharp edges.
• Do not carry or attach the product by the cable.
• Use only extension cables that are splash-proof and
intended for outdoor use. Always unroll a cable drum
completely before use. Check the cable for damage.
• Pull out the mains plug before all work on the prod-
uct, in work breaks and when not in use.
• Mains connection cables shall not have a smaller
cross-section than rubber hose lines with the desig-
nation H07RN-F 3*1.0mm². The cable length must
be 10 m. The conductor core cross-section of the
extension cable must be at least 1.5 mm
Lubricants are used inside the garden pump which may
contaminate the liquids flowing out if the product is op-
erated improperly or damaged.
Warning! This power tool generates an electromagnet-
ic field during operation. This field can impair active or
passive medical implants under certain circumstances.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Before performing setting or maintenance work, un-
plug the mains plug.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
6. Technical data
Engine
Nominal power
Max. delivery flow
Max. delivery height
Max. delivery pressure
www.scheppach.com
.
2
230V~ / 50 Hz
600 W
3000 l/h
35 m
3.5 bar
GB | 21
Need help?
Do you have a question about the GP600S and is the answer not in the manual?