Table of Contents
Advertisement
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
Mini-Prep
Plus Processor and the standard
®
parts for it: SmartPower Blade
®
grinding blade, spatula, and instruction/recipe
booklet.
CAUTION: THE CUTTING BLADE HAS VERY
SHARP EDGES.
To avoid injury when unpacking, please
follow these instructions:
1. Place the box on a table or kitchen counter.
Be sure the box is right side up.
2. Lift and remove the cardboard lid from the
work bowl cover.
3. Grasping the work bowl cover, lift the unit up
and out of the box and place on the tabletop.
4. Turn the work bowl cover clockwise to unlock
it from the unit base. Lift up and remove.
5. Carefully lift the protective cardboard off the
chopping/grinding blade shaft.
6. CAREFULLY REMOVE THE METAL BLADE
BY GRASPING THE CENTRE WHITE HUB
AND LIFTING IT STRAIGHT UP. NEVER
TOUCH THE BLADE, AS IT IS RAZOR
SHARP.
7. Read the instructions thoroughly before using
the machine.
CONTENTS
Important Safeguards ................................ 2
Introduction ............................................... 3
Assembly Instructions ............................... 3
Tips For Processing ................................... 4
Processing Food ....................................... 4
4-Cup (1L)
®
Cleaning and Storage ................................ 5
Troubleshooting ......................................... 5
metal chopping/
Operating Techniques ............................... 5
Recipes ...................................................... 8
Warranty .................................................. 12
IMPORTANT
SAFEGUARDS
When uSInG An eLeCTRICAL APPLIAnCe,
BASIC SAFeTy PReCAuTIOnS ShOuLd
ALWAyS Be AdheRed TO, InCLudInG The
FOLLOWInG:
1. Read all instructions.
2. To protect against risk of electric shock,
do not put motor base in water or other
liquid.
3. Close supervision is necessary when
any appliance is used by or near children.
4. Always unplug unit from outlet when
not in use, before putting on or taking
off parts, before cleaning, and before
removing food from bowl. To unplug,
grasp plug and pull from electrical outlet.
never pull cord.
5. Avoid contact with moving parts.
6. do not operate any appliance with a
damaged cord or plug after the
appliance malfunctions, or if appliance
has been dropped or damaged in any
manner. Return the appliance to the
nearest authorized Customer Service
(see Warranty for details) for examination,
repair, and electrical or mechanical
adjustment.
7. The use of attachments not recommended
or sold by Cuisinart may cause fire,
electric shock or injury.
8. do not let cord hang over edge of table
or counter, or touch hot surfaces.
9. do not use outdoors.
10. Keep hands and utensils away from
moving blade while processing, to
prevent the risk of severe injury to
persons, or damage to the chopper/
grinder. A scraper may be used, but
must only be used when the chopper/
grinder is not running.
11. Blade is extremely sharp. handle
carefully when removing, inserting or
cleaning. Always allow blade to stop
moving before removing cover.
12. To reduce the risk of injury, never place
cutting blade on base without first putting
work bowl properly in place.
13. Be certain cover is securely locked in
place before operating appliance. do
not attempt to remove cover until blade
has stopped rotating.
14. do not attempt to defeat the cover inter
lock mechanism, as serious injury may
result.
15. Before using, check work bowl for
presence of foreign objects.
Advertisement
Table of Contents
