SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ●...
Page 3
ASSEMBLY INSTRUCTIONS (continued) For eave mounted only: Swing the sensor head towards the mounting bracket. Rotate the sensor head clockwise 180˚ so the controls face down. Backplate Controls Controls Controls Turn off the power at fuse or circuit box. 1. Install the mounting strap (BB) 2.
ASSEMBLY INSTRUCITONS (continued) Sensitivity of Motion Sensor: Fig.4 ● You can adjust the sensitivity of the motion sensor by using the "SENSITIVITY" selector located on the right side of the sensor head. Note: Range set too high may increase false triggering. ●...
ASSEMBLY INSTRUCTIONS (continued) d) d) ASSEMBLY INSTRUCTIONS (continued) FUNCTION AND OPERATION (continued) 5. Manual Override (nighttime operation only) Fig.7 ● To temporarily override the settings in "AUTO" or "OFF" mode for on-demand continuous high-level brightness at night, turn the wall switch "OFF" then turn it "ON" twice within 3 seconds, Turn wall switch OFF-ON-OFF-ON the light remains on all night long.
CARE AND MAINTENANCE ● To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only. ● Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the finish.
Page 7
If unable to fix any of the above issues, please consult a certified electrician. FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture with the original sales receipt back to your nearest MENARDS retail store.
Need help?
Do you have a question about the E24109BK and is the answer not in the manual?
Questions and answers