Advertisement
Quick Links
PACKAGE CONTENTS
HARDWARE CONTENTS Note: Hardware not shown actual size.
AA
Mounting Screw
X2
DD
Fixture Mounting Screw
X1
2-LIGHT OUTDOOR SENSOR LIGHT
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
B
A
D
BB
Mounting Strap
X1
EE
Wire Connector
X3
SKU Number: 356-9278
Model Number: E8972W
C
CC
Mounting Bracket Screw
X1
356-9279
E8972BZ
200810
Advertisement
Related Manuals for Patriot Lighting E8972W
Summary of Contents for Patriot Lighting E8972W
- Page 1 SKU Number: 356-9278 356-9279 2-LIGHT OUTDOOR SENSOR LIGHT Model Number: E8972W E8972BZ Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS HARDWARE CONTENTS Note: Hardware not shown actual size.
-
Page 2: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). •... - Page 3 ASSEMBLY INSTRUCTIONS (continued) Before installing the light fixture under an eave, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of electrical shock. For eave mounted only: Rotate the sensor head clockwise 180˚ so the Swing the sensor head towards the mounting bracket.
- Page 4 ASSEMBLY INSTRUCTIONS (continued) ASSEMBLY INSTRUCTIONS (continued) ASSEMBLY INSTRUCTIONS (continued) Adjusting the Sensor Head (D): 1. Aim sensor head toward desired detection area, maintaining a 5° - 40° downward angle to allow moisture to drain. Note: Make sure sensor head is positioned with controls facing toward the ground.
- Page 5 ASSEMBLY INSTRUCTIONS (continued) FUNCTION AND OPERATION (continued) ASSEMBLY INSTRUCTIONS (continued) 2. AUTO MODE (nighttime operation only) ● To shift to “AUTO” mode, slide the Time Delay switch to the desired time setting (1min, 2min,3 min). At dusk, the light turns on to pre-selected low level brightness. When motion is detected, the light turns to full brightness and stays on as long as motion continues.
- Page 6 ASSEMBLY INSTRUCTIONS (continued) FUNCTION AND OPERATION (continued) ASSEMBLY INSTRUCTIONS (continued) Customization Options Shut-off Delay ● The shut-off delay is the length of time the light will stay at full brightness after motion is detected. ● You can set the shut-off delay time: “1min”, “2min”, “3min”. Notes: 1.
-
Page 7: Care And Maintenance
CARE AND MAINTENANCE Clean the glass and coated metal surfaces with a non-abrasive cleaner. Do not use any cleaners with chemicals, solvents or harsh abrasives, The motion detecting lens is coated with a specially painted finish and requires special care when cleaning. Use only a soft dry cloth to dust or wipe the lens area. TROUBLE SHOOTING Problem Possible Cause... - Page 8 If unable to fix any of the above issues, please consult a certified electrician. FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture with the original sales receipt back to your nearest MENARDS retail store.
Need help?
Do you have a question about the E8972W and is the answer not in the manual?
Questions and answers