Advertisement
8. Take the fan housing you removed in Step 4 and place it atop the inner chassis again,
making sure that the screw holes on the housing align with the screw holes on the inner
chassis. Re-affix the two fan housing screws (red arrows), then reseat the power connector
(green arrow).
9. Align the inner-chassis with the track in the outer enclosure, then slide the inner chassis
into the enclosure. If there is resistance do not force the inner chassis. Remove it, re-align
it, then try again.
Advertisement
Need help?
Do you have a question about the Express 4M2 and is the answer not in the manual?
Questions and answers