OWC Express 4M2 Assembly Manual & User Manual page 4

2.1 Assembly
Please follow the instructions below to install one or more M.2 SSDs into the OWC
Express 4M2 enclosure. If you have any concerns please contact OWC
Support
1. Remove the Express 4M2 from its packaging then remove the two screws on the back of
the device. Safely store the two screws for reassembly.
2. Holding the front cover, carefully slide the inner chassis out of the outer enclosure.
3. Set the outer enclosure aside. Notice there is a fan housing affixed to the inner chassis;
this covers the area where SSDs are installed, so it will need to be removed temporarily.
Set the inner chassis on your work surface so the fan is facing upward before proceeding
to Step 4.