Chauvin Arnoux AEMC INSTRUMENTS OX 5042 Instructions Manual
  1. Manuals
  2. Brands
  3. Chauvin Arnoux Manuals
  4. Measuring Instruments
  5. AEMC OX 5042B
  6. Instructions manual
Chauvin Arnoux AEMC INSTRUMENTS OX 5042 Instructions Manual

Chauvin Arnoux AEMC INSTRUMENTS OX 5042 Instructions Manual

Handscope
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com
Model OX 5042 & OX 5042B Handscope
Instructions for General Electrical Measurements
First-Time Setup
1. Turn the instrument ON.
2. Press Memory Mode
3. Use the left/right buttons to highlight the .cfg icon
Use the up/down buttons to select the Load File icon
4.
Press the left arrow button twice to select files and the up/down buttons to
5.
highlight default.cfg.
6.
Press Enter, then Right Arrow, and then Enter again to load the default
configuration.
7. Press Meter Mode then then press Channel B
8. Press the right navigation button
default this is set to x1.
9. Press the down navigation button
10. Press Enter
11. Press
to highlight the Units field. Press
12. Press
to save the setting. The main menu now appears as follows:
13. Press Memory Mode
14. Use the left/right buttons to highlight the .cfg icon
15. Use the up/down buttons to highlight the Save Mode
16. Use the up button to highlight the Save File icon
This completes the First Time Setup.
Instruments Technical Support (800) 343-1391 (Ext. 351) •
®
AEMC
.
to save the setting.
.
.
until the Multiplier field is highlighted. By
until the
to highlight the A setting.
techsupport@aemc.com
Chauvin Arnoux
®
and press Enter
setting is highlighted.
and press Enter
and press Enter
99-MAN 100453 v11 05/24
, Inc.
.
.
.
.
.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEMC INSTRUMENTS OX 5042 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chauvin Arnoux AEMC INSTRUMENTS OX 5042

Summary of Contents for Chauvin Arnoux AEMC INSTRUMENTS OX 5042

  • Page 1 Chauvin Arnoux , Inc. ® 15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com Model OX 5042 & OX 5042B Handscope Instructions for General Electrical Measurements First-Time Setup 1. Turn the instrument ON. 2. Press Memory Mode 3.

  • Page 2: Ac Voltage Measurement

    Chauvin Arnoux , Inc. ® 15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com AC Voltage Measurement 1. Attach the BNC adapter (shown on right) to the Channel A input. 2. Attach the 10 ft black and red leads to the adapter.

  • Page 3: Ac Current Measurement

    Chauvin Arnoux , Inc. ® 15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com AC Current Measurement 1. Select the current probe based on the current to be measured: • MN251T (if in your kit) for measuring from (1 to 200) A •...
  • Page 4 Chauvin Arnoux , Inc. ® 15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com AC Voltage and Current Harmonics 1. Press Harmonics Mode . Connect the voltage leads and attached the current probe. Press Auto Set 2.
  • Page 5 Chauvin Arnoux , Inc. ® 15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com Millivolt Drop Current Harmonics 1. Press Meter Mode and then press Channel A 2. Verify the following menu appears. NOTE: If this menu screen is not displayed, press the Channel A button again.

  • Page 6: Loading A Saved Configuration

    Chauvin Arnoux , Inc. ® 15 Faraday Drive • Dover, NH 03820 • (800) 343-1391 • (603) 749-6434 • www.aemc.com Three most IMPORTANT things to remember: 1) Make sure you are in AUTO for Meter mode. 2) Turn Channels OFF when they are not being used.

This manual is also suitable for:

Aemc instruments ox 5042b

Table of Contents