BOSS ILLUMINATION OPTIMUS Product Manual

OPTIMUS
POST TOP LIGHT
PRODUCT SPECIFICATIONS
Input Voltage : 220-240V AC
Power Selectable
: 60W / 45W / 30W / 18W
Beam Angle : Type V
Operating Temperature : -10 to 40°C
Material : Aluminium
60mm 66
IP
PARTS INCLUDED
x1
LED
Luminaire
OPTIONAL COMPATIBLE PARTS sold separately
Pole Mount Pole Mount
Spigot Spigot
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2024
COPYRIGHT BIA V
08
IK
02.24
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modified, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.
PRODUCT VARIANTS
Dimming: Non Dim
1-10V
ADDITIONAL INFORMATION
1.
This product is suitable for outdoor use.
2. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
3. Do not use harsh chemicals or solvents. Do not use high pressure
cleaners.
4. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire. These
damages may result in corrosion.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting