BOSS ILLUMINATION VIO.S Product Manual

VIO ( TYPE S )
POLE LIGHT

PRODUCT SPECIFICATIONS

Input Voltage : 100-240VAC
Operating Temperature : -10 to 40°C
Weight : 7 .6kg
Material : Aluminium
90mm 65 08
IP IK

PARTS INCLUDED

x1
Luminaire 8-10m Cable
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
08.20
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation guidelines
are disregarded, if the product has been
modified, or if damage is caused by
misuse or improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website for
latest version.

PRODUCT VARIANTS

30W
Power :
40W
50W
CCT : 3000K
4000K
5000K
Dimming: Non-dimmable
1-10V
DALI

ADDITIONAL INFORMATION

1. 1-10V and DALI dimmable option available. These cables must be
terminated if not in use.
2. Please ensure luminaire cover is sealed.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire. These
damages may result in corrosion.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting