BOSS ILLUMINATION VESPER Product Manual

VESPER
STREET LIGHT

PRODUCT SPECIFICATIONS

Input Voltage : 100-277 VAC 50-60Hz
Ambient Temperature : -10 to 45°C
Dimming : No
Beam Angle : 135°
66 10
34~38
IP IK
mm

PARTS INCLUDED

LED 8m Cable
Luminaire
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
08.19
© 2019
COPYRIGHT BIA V
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.

PRODUCT VARIANTS

Power/Weight: 20W
30W
40W
60W
80W
90W
Photocell:
Yes
No

ADDITIONAL INFORMATION

1. This luminaire is not dimmable.
2. Luminaire installation angle is adjustable. Refer instructions
overleaf.
3. Installation must be carried out with care to ensure the surface of
the luminaire is not scratched or damaged. Damaged surfaces will
result in material corrosion when exposed under harsh weather
conditions.
4. Please ensure luminaire cover is sealed.
5. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
5.8kg CCT :
3000K
5.8kg 4000K
5.8kg 5000K
5.8kg
6.2kg
6.2kg
www.bia.lighting | sales@bia.lighting