Advertisement
RIM
HIGH BAY LIGHT
PRODUCT SPECIFICATIONS
Input Voltage
: 100-277VAC
Ambient Temperature : -10 to 45°C
Dimming
: 1-10V
65
IP
PARTS INCLUDED
High Bay
3-pin AU
Hook
Plug
OPTIONAL COMPATIBLE PARTS sold separately
Mounting
PC lens
Bracket
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
10.19
© 2019
COPYRIGHT BIA
V
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
PRODUCT VARIANTS
Power: 100W
150W
200W
CCT:
5000K
ADDITIONAL INFORMATION
1. This luminaire can be dimmable with the installation of a 1-10V
dimmable device.
2. Cable for 1-10V dimming must be terminated if not in use.
3. Luminaire can be installed with a hook or a mounting bracket.
Refer instructions overleaf.
4. Installation must be carried out with care to ensure the surface of
the luminaire is not scratched or damaged. Damaged surfaces will
result in material corrosion when exposed under harsh weather
conditions.
5. Please ensure luminaire cover is sealed.
6. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
Beam Angle: 60°
90°
120°
www.bia.lighting | sales@bia.lighting
Advertisement
Table of Contents
Related Manuals for BOSS ILLUMINATION RIM 100
Summary of Contents for BOSS ILLUMINATION RIM 100
- Page 1 P R O D U C T M A N U A L Disclaimer: Please read these warranty and installation instructions carefully before installing the product. HIGH BAY LIGHT BIA products are manufactured and certified in accordance with all mandatory Australian Standards. All products must be installed by a Must be installed by a licensed electrician.
- Page 2 P R O D U C T M A N U A L INSTALLATION INSTRUCTIONS A HOOK Before commencing installation, ensure the main power is switched off. Screw in the hook at the top of the luminaire. Tighten the screw nut. Tighten the screw to secure the hook.
Need help?
Do you have a question about the RIM 100 and is the answer not in the manual?
Questions and answers