BOSS ILLUMINATION MAGNA 24 Product Manual

24
MAGNA
INGROUND LIGHT

PRODUCT SPECIFICATIONS

Power : 24W
Input Voltage : 24V DC
Ambient Temperature : -10 to 45°C
Dimming : PWM
225mm 68
IP

PARTS INCLUDED

Inground
Light
SOLD SEPARATELY
Driver Canister
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
Stainless
Steel
10 316
IK
03.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.

PRODUCT VARIANTS

CCT : 3000K
4000K
6000K
RGB
Beam Angle: 10°
20°
40°
60°

ADDITIONAL INFORMATION

1. This product can be installed directly into decking.
2. Canister is required for installation into concrete slab.
3. The face of the light fitting must be installed flushed against the
surface.
4. Installation on uneven surfaces is not recommended.
5. Ensure the prepared cable is of the correct size and length.
6. Ensure all drivers, cables and joins are sufficient and installed to
the required IP rating.
7 . Adequate drainage must be prepared underneath the light/
canister.
8. If cleaning maintenance is required, ensure power is off, use a
clean microfibre cloth, slightly dampened with a mild dilution of
detergent that is PH neutral, alcohol free and non-abrasive.
page 3 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting