BOSS ILLUMINATION ZURA Product Manual

ZURA
WALL LIGHT
PRODUCT SPECIFICATIONS
Power : 1 x 35W max
Input Voltage : 240V AC
Ambient Temperature : -10 to 45°C
Globe Base : GU10
Dimming : No
65 10
IP GU
PARTS INCLUDED
Luminaire Bracket &
Accessories
SOLD SEPARATELY
GU10 Globe
WARRANTY STATEMENT This product is covered by a 2 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
04.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
PRODUCT VARIANTS
Titanium Aluminium
Colour :
Black
Stainless Steel 316
ADDITIONAL INFORMATION
1. This product is suitable for outdoor use.
2. Installation must be carried out with care to ensure the surface
of the luminaire is not scratched or damaged. Damaged surfaces
will result in material corrosion when exposed under harsh
weather conditions.
3. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. If cleaning maintenance is required, ensure power is off, use a
clean microfibre cloth, slightly dampened with a mild dilution of
detergent that is PH neutral, alcohol free and non-abrasive.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting