Summary of Contents for Texas Instruments TMAG5233
Page 1
The TMAG5233EVM provides an easy-to-use • Door and Window Sensor platform to evaluate or prototype with the • Appliance Door Open/Close TMAG5233 Hall-effect switch. The evaluation module • E-Meter Tamper Detection (EVM) includes one magnet in addition to the • Electric Smart Lock TMAG5233EVM.
This user’s guide describes the characteristics, operation, and use of the TMAG5233 evaluation module (EVM). This EVM is designed to evaluate the performance of the TMAG5233. Throughout this document, the terms evaluation board, evaluation module, and EVM are synonymous with the TMAG5233EVM. This document includes a schematic, reference printed circuit board (PCB) layouts, and a complete bill of materials (BOM).
Page 3
2 Hardware The EVM is an easy-to-use platform for evaluating the main features and performance of the TMAG5233. The EVM provides LEDs tied to the outputs of the device for easy evaluation of the switch and a jumper in-line with the power supply to measure the device current or provide an external power supply.
Section 2. The TMAG5233 outputs trigger when a magnet is near the sensor. When the magnetic field at the sensor crosses the threshold of the device, the output turns the LEDs on. The user can also check the output through the connector on the board.
All trademarks are the property of their respective owners. 6 Related Documentation For related documentation, see the following: • Texas Instruments, TMAG5233 In-Plane Hall-Effect Switch for Cost-Optimized Designs data sheet • Texas Instruments, TI Sensor Control Board user's guide SLYU063 – SEPTEMBER 2024...
Page 8
STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
Page 9
www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
Page 10
www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
Page 11
www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
Need help?
Do you have a question about the TMAG5233 and is the answer not in the manual?
Questions and answers