Blodgett IMVECTION IMV-4E Installation Operation & Maintenance page 8

Installation
Attachment
LEG OPTIONS
Figure 1
STAND OPTION
1. Follow the instructions provided in the ImVection
stand kit.
ATTACHMENT
1. Elevate the oven by lifting either the front or the back
of the unit.
2. Align the threaded stud of the leg with the bolt hole
on the bottom of the unit and turn the leg until fully
installed.
3. Repeat for each leg.
4. Adjust the legs until the unit is level by extending the
bottom portion of the leg.
6
Figure 2