SAJ HS3 T2 Series Quick Manual page 40

4.
Configure the system on the SAJ App named Elekeeper. For details, refer to the section "System Commissioning" in the
Configuration Instructions
5.
If any error occurs, check the error code displayed on the App. For detailed error messages, refer to the section "Troubleshooting" in
User Manual
the .
---End
V1.0
Solid on
On 1s, off 1s
BACK-UP
Off
Solid on
On 1s, off 1s
Off
COM
Solid on
On 1s, off 3s
On 1s, off 1s
EV CHARGER
Off
.
The AC-side load is working properly.
The AC-side load is overloaded.
The AC-side load is disconnected or off.
In good communication with the meter, BMS, and cloud.
Lost communication with the meter, BMS, or cloud.
Lost communication with all the meter, the BMS, and cloud.
The EV charger is in standby mode and working properly.
The EV charger is charging.
The EV charger is not working properly.
The EV charger is disconnected.
Installer:
40
SAJ
© 2024 Sanjing. All rights reserved.