SC2000E (Mini) Series Vision Sensor Quick Start Guide
9.3 RS-232 Serial Port
The device supports outputting data via RS-232 serial port, and you can set serial port
communication via the client software. Refer to the user manual of the SCMVS client
software for details.
The supplied 17-pin cable has a DB9 RS-232 serial port. Refer to the figure and table below
for pin definitions.
Figure 9-12 DB9 Serial Port Connector
Table 9-4 Pin Definitions
Pin No.
Name
2
TX
3
RX
5
GND
Description
Transmits data
Receives data
Signal ground
25
Need help?
Do you have a question about the SC2000E Series and is the answer not in the manual?