Getting Started; Accessory List; Turning Power On And Off; Detaching And Attaching The Front Panel - Alpine 9870 - CDE Radio / CD Owner's Manual

Rds mp3 cd receiver
Table of Contents

Advertisement

Getting Started

SOURCE/
(Release)

Accessory List

• Head unit ............................................................................1
• Power cable ........................................................................1
• Mounting sleeve.................................................................1
• Carrying case .....................................................................1
• Rubber Cap ........................................................................1
• Hex Bolt ..............................................................................1
• Screw (M5 × 8)....................................................................4
• Owner's Manual .......................................................... 1 set

Turning Power On and Off

Press SOURCE/
to turn on the unit.
• The unit can be turned on by pressing any other button except
(Release) and eject
.
Press and hold SOURCE/
turn off the unit.
• The first time power is turned on, the volume will start from level 12.

Detaching and Attaching the Front Panel

Detaching
1
Turn off the unit power.
2
Press
(Release) at the lower left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it
may result in malfunction.
6
-EN
for at least 2 seconds to
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press RESET with a ballpoint pen or similar pointed
object.
RESET switch

Adjusting Volume

Press
or
until the desired sound is obtained.
Pressing and holding
or
continuously.
Connectable to Steering Remote Control Interface Box
You can operate this unit from the vehicle's control unit when
an Alpine Steering Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
1
will change the volume level

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cde-9870r

Table of Contents