Lab-Volt 5150 Series Manual page 14

ROBOT SYSTEM
SERIES 5150
Model 46604 – Work Surface
The Work Surface is a perforated metal surface,
883 x 584 x 32 mm (34.75 x 23 x 1.25 in), on which the
equipment is placed. The Work Surface can be put atop
a regular work table or installed on one of the optional
benches.
Model 96474 – Square Part (Plexiglass)
The Square Part (Plexiglass) is a 13 x 51 x 51 mm
(0.5 x 2 x 2 in) block of clear plexiglass used for various
manipulations with the Servo Robot.
14
Model 96942 – Square Part (Wax)
The Square Part (Wax) is a 13 x 51 x 51 mm (0.5 x 2 x
2 in) block of blue File-A-Wax used for various
manipulations with the Servo Robot.