Pytes V15 User Manual page 7

1. Safety Precautions
1.1 Transportation
Pytes V15 original packaging complies with regulation of UN3480, Class 9, Packaging
Group II. Always check all applicable local, national, and international regulations
before transporting a LFP battery.
The battery must be transported in its original or equivalent package and in an upright
position. Protect the battery from severe vibration, shock, squeeze, and exposure to
rain and direct sunlight during transportation.
Use soft slings during loading and unloading process when battery is in its package to
avoid damage. Do not lift the battery at the terminals or communication cable; only lift
the battery at handles. Do not stand below a product when it's hoisted.
1.2 Storage
Follow the storage instructions in this manual to optimize the lifespan of the LFP
battery during storage. If these instructions are not followed and the LFP battery has
no energy remained when it is checked, consider it to be damaged. Do not attempt to
recharge or use it. Replace it with a new LFP battery.
Disconnect the LFP battery from all loads, and the charging device if applicable.
Store the battery in a cool and dry place without direct sunlight.
Keep the battery away from corrosive substances, inflammable and explosive
material as well as hazardous gases.
The Self-discharge of the LFP battery pack is ≤3% per month.
Charge the LFP battery to more than 90% of its rated capacity for long-term storage
(＞6months) every 6 months.
1.3 Emergency Situations
1) Leaking Batteries
If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas. If one
is exposed to the leaked substance, immediately perform the actions described below.
Inhalation: Evacuate the contaminated area, and seek medical attention.
Contact with eyes: Rinse eyes with flowing water for15minutes, and seek medical
attention.
Contact with skin: Wash the affected area thoroughly with soap and water, and seek
medical attention.
Ingestion: Induce vomiting, and seek medical attention.
7