Intel SRCSASBB81 Hardware User's Manual page 10

•
Multiple cache options allow configuration-specific performance optimization:
— Write-back. Faster because it does not wait for the disk but data will be lost if
— Write-through. Usually slower but ensures data is on the disk.
— Read Ahead. Predicts next read will be sequential and buffers this data into the
— Non Read Ahead. Always reads from the drive after determining exact location
— Adaptive Read Ahead. Reads ahead and caches data only if doing sequential
— I/O setting. Determines whether read operations check the cache before reading
•
Redundancy through:
— Configuration stored in nonvolatile RAM and on the drives (COD).
— Hot-swap support.
— Optional battery backup for cache memory. Controller provides fast or trickle
SAS/SATA Features of the 1078 Controller
•
Provides eight independent phys, each supporting 3.0 Gbps SATA data transfers.
•
Scalable interface that supports up to 32 physical devices and 64 logical devices via
expanders.
•
Supports SSP to enable communication with other SAS devices.
•
Supports SMP to communicate topology management information.
•
Supports single PHY or wide ports consisting of 2, 3, or 4 PHY within one quad
port.
•
Allows addressing of multiple SATA targets through an expander if using SATA 2.0-
compliant hard disk drives.
•
Allows multiple initiators to address a single target (in a fail-over configuration)
through an expander.
4
power is lost.
cache.
of each read.
reads.
from disks.
✧ Cache I/O: Checks cache first, only reads disk if data is not in the cache.
✧ Direct I/O: Reads data directly from disk. (not cache)
charges.
Intel® RAID Controller SRCSASBB8I Hardware User's Guide