Adding Cards - Dell Dimension 4100 Solution Manual

Adding Cards

CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions on page 7.
Install only PCI cards in your computer. Before installing a card, make sure
that a slot is available for it.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network jack.
Turn off the computer and devices, and disconnect them from their
1
electrical outlets.
Briefly press the power button.
2
Pressing the power button when the computer is not connected to an
electrical outlet discharges residual electricity and can help prevent
system board damage.
Remove the computer cover (see page 42).
3
Unscrew and remove the filler bracket for the card slot you want to use.
4
filler bracket
45
Ad d i ng Part s