Dell Dimension 4100 Solution Manual page 47

Make sure that the card is fully seated and that its bracket is within the
card slot.
fully seated
Secure the bracket on the end of the card with the screw you removed
6
in step 2.
Connect any cables required for the card as described in the card
7
documentation.
Replace the computer cover (see page 71).
8
NOTICE:
To connect a network cable, first plug the cable in to the network
jack and then plug it in to the computer.
Plug your computer and devices into their electrical outlets, and turn
9
them on.
Install any drivers required for the card as described in the card
10
documentation.
not fully seated
bracket within slot
bracket caught
outside of slot
47
Ad d i ng Part s