Front I/O Panel Housing Assembly - Mt Chassis - HP dx2310 - Microtower PC Service & Reference Manual

6.8 Front I/O Panel Housing Assembly - MT chassis

1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. Disconnect two attaching cables from the system board: the power switch/LED cable, and
the front USB cable.
4. Remove the two screws 1 that secure the housing to the chassis and then pull the housing 2
away from the chassis.
To install the housing assembly, reverse the removal procedures.
Service Reference Guide
Removal and Replacement Procedures— Microtower (MT) Chassis
(Section 6.1, "Preparation for
(Section 6.1, "Preparation for
2
490778-001
Disassembly").
Disassembly").
1
1
6–17