Expansion Cards
Expansion Slot Cover Lock
Prepare the computer for disassembly
1.
Remove the access panel
2.
Lay the computer down on its side to make it easier to work on.
3.
On the rear of the computer, remove the screw that secures the slot cover lock in place (1) then, slide
4.
the slot cover lock up and away from the slots to remove it from the computer (2).
To reinstall the slot cover lock, reverse the removal procedure.
44
Chapter 7 Removal and Replacement Procedures— Microtower (MT) Chassis
(Preparation for Disassembly on page
(Access Panel on page
38)
37)
ENWW